China SL-FL39 DIN 4102 Smoke Density Fire Tester Manufacturers and Suppliers | Skyline
industrial sewing machine

SL-FL39 DIN 4102 Smoke Density Fire Tester

Incazelo emfushane:

Kufanele isetshenziselwe ukulinganisa isici somke ezikhiqiza ekwakheni impahla ngaphansi isimo elawulwa amandla omlilo noma esibolile, futhi ingasetshenziswa ezinye Plastics.


  • Min.Order Ubuningi: 1 iyunithi
  • Inani: kungaxoxwa
  • Iphakheji: Plywood Case
  • Model: SL-FL39
  • Amazinga: ASTM D 2843, Din 4102
  • umkhiqizo Imininingwane

    umkhiqizo Amathegi

    Din 4102 Isakhiwo Material Flammability Testing Isisetshenziswa / Intuthu Wugqinsi Fire Tester

    Product introduction of the Smoke Density Fire Tester

    Kufanele isetshenziselwe ukulinganisa isici somke ezikhiqiza ekwakheni impahla ngaphansi isimo elawulwa amandla omlilo noma esibolile, futhi ingasetshenziswa ezinye Plastics.

    Amazinga 

    ASTM D 2843, Din 4102

    Product Specification of the Smoke Density Fire Tester

    Maximum smoke density (MSD) and smoke density (SDR) for the specimen

    0-100% continuously measurable and automatically calculated

    With the standard optical correction error

    not more than 3%; each device is equipped with three standard filters, proof of light source data, representative

    Bunsen lamp working pressure

    (210 ± 5) KPa

    Bunsen lamp on the sample to impose a flame

    4min

    Automatic timing, automatic ignition, automatic smoke; luminous flux can be phased linear calibration test data more acurrate;

    Touch Screen

    5 inch effective display size 11cm wide 6.28cm; b. Resolution: 800 * 480

    communication interface

    RS232, 3.3V CMOS or TTL

    serial port d. storage capacity

    1G

    Gas source

    95% propane gas, or the same purity of the gas (customer-owned)

    Dimension

    long * wide * high 740 * 500 * high 900 (mm)

     

     

    Fetures:

    a. Size: 5 inch effective display size 11cm wide 6.28cm;

    b. Resolution: 800 * 480

    c. communication interface RS232, 3.3V CMOS or TTL, serial port

    d. storage capacity: 1G

    e. Using pure hardware FPGA driver display, "zero" start time, power can run

    f. using M3 + FPGA architecture, M3 is responsible for instruction resolution, FPGA focus TFT display, speed and reliability are leading the same kind of program

    g. The main controller uses low-power processor, automatically enter the energy-saving mode

    Product parameters of the Smoke Density Fire Tester

     nelangabi lomlilo  abafundi ukukhanyisa, ubude 260mm, umlomo wombhobho ubukhulu 0.13mm, 45 ° engela nge ibhokisi intuthu;
     uhlelo Photoelectric  umthombo wokukhanya ngoba isibani, amandla 15W, ezisebenza voltage 6V;
     uhlelo Exhaust  umshini ifakwe fan eqinile, emva test, qeda kungaba ngaphandle liphele;
     Intuthu kwabantu nesilinganiso ibanga  0 ~ 100%;
     Intuthu kwabantu nesilinganiso ukunemba  ± 3%;
     Receiver  ngokuba Silicon photovoltaic amaseli, ukukhanya ukudluliswa izinga 0% ngoba ukudlula ukukhanya, ukukhanya ukudluliswa izinga 100% ukukhanya ngaphandle kwesembozo ngokuphelele ngokusebenzisa;
     Main sikaphalafini zokusebenza ingcindezi  276KPa (obulungisekayo);

  • Previous:
  • Okulandelayo:

  • Bhala umyalezo wakho lapha futhi ulithumele kithi
    industrial sewing machine