China SL-FL39 DIN 4102 Smoke Density Fire Tester Manufacturers and Suppliers | Skyline
industrial sewing machine

SL-FL39 DIN 4102 Smoke Density Fire Tester

Qisqa Tasvir:

Shuningdek, yonish yoki yoyilishining nazorat sharti moddiy qurish va somke-ishlab chiqarish tavsifini o'lchash uchun ishlatiladigan mos boshqa plastik materiallar uchun foydalanish mumkin.


  • Min.order Soni: 1 birligi
  • Narx: sof bo'lishi
  • Siz: kontrplak ishini
  • : Model SL-FL39
  • Standartlar: ASTM D 2843, 4102 DIN
  • Mahsulot batafsil

    Mahsulot teglar

    Din 4102 qurilish materiallari Olov sinov uskunalari / Smoke Zichlik Fire Tester

    Product introduction of the Smoke Density Fire Tester

    Shuningdek, yonish yoki yoyilishining nazorat sharti moddiy qurish va somke-ishlab chiqarish tavsifini o'lchash uchun ishlatiladigan mos boshqa plastik materiallar uchun foydalanish mumkin.

    standartlari 

    ASTM D 2843, 4102 DIN

    Product Specification of the Smoke Density Fire Tester

    Maximum smoke density (MSD) and smoke density (SDR) for the specimen

    0-100% continuously measurable and automatically calculated

    With the standard optical correction error

    not more than 3%; each device is equipped with three standard filters, proof of light source data, representative

    Bunsen lamp working pressure

    (210 ± 5) KPa

    Bunsen lamp on the sample to impose a flame

    4min

    Automatic timing, automatic ignition, automatic smoke; luminous flux can be phased linear calibration test data more acurrate;

    Touch Screen

    5 inch effective display size 11cm wide 6.28cm; b. Resolution: 800 * 480

    communication interface

    RS232, 3.3V CMOS or TTL

    serial port d. storage capacity

    1G

    Gas source

    95% propane gas, or the same purity of the gas (customer-owned)

    o'lchash

    long * wide * high 740 * 500 * high 900 (mm)

     

     

    Fetures:

    a. Size: 5 inch effective display size 11cm wide 6.28cm;

    b. Resolution: 800 * 480

    c. communication interface RS232, 3.3V CMOS or TTL, serial port

    d. storage capacity: 1G

    e. Using pure hardware FPGA driver display, "zero" start time, power can run

    f. using M3 + FPGA architecture, M3 is responsible for instruction resolution, FPGA focus TFT display, speed and reliability are leading the same kind of program

    g. The main controller uses low-power processor, automatically enter the energy-saving mode

    Product parameters of the Smoke Density Fire Tester

     chiroq  talabalar nur, uzunligi 260mm, tuynugi diametri 0.13mm, tutun qutisi bilan 45 ° burchak;
     fotoelektrik tizimi  chiroq, elektr 15W, faoliyat kuchlanish 6V uchun nur manbai;
     chiqarish tizimi  mashina sinov so'ng, chiqarish zaryadsizlanishi ochiq havoda bo'lishi mumkin, kuchli fan bilan jihozlangan;
     Smoke zichligi o'lchash diapazoni  0 ~ 100%;
     Smoke zichligi o'lchov aniqligi  ± 3%;
     Qabul  Silikon fotoelektrik hujayralar orqali butunlay qoplami 100% nur nur, yorug'lik uzatish tezligi o'tish uchun 0% yengil uzatish tezligi uchun;
     Asosiy o'choq ishchi bosimi  276KPa (sozlanishi);

  • Oldingi:
  • Keyingi:

  • Bu yerda, sizning xabaringizni yozing va bizga yuboring
    industrial sewing machine