China SL-FL39 DIN 4102 Smoke Density Fire Tester Manufacturers and Suppliers | Skyline
industrial sewing machine

SL-FL39 DIN 4102 Smoke Density Fire Tester

Მოკლე აღწერა:

გამოსადეგია, რომელიც გამოიყენება საზომი somke მწარმოებელ დამახასიათებელი სამშენებლო მასალა კონტროლირებად მდგომარეობის წვის ან რღვევა, და ასევე შეიძლება გამოყენებულ იქნას სხვა პლასტმასის.


  • Min.Order რაოდენობა: 1 ცალი
  • ფასი: შეთანხმებით
  • პაკეტი: პლაივუდი შემთხვევაში
  • მოდელი: SL-FL39
  • სტანდარტები: ASTM D 2843, DIN 4102
  • პროდუქტის დეტალური

    პროდუქტის Tags

    DIN 4102 სამშენებლო მასალები flammability ტესტირების მოწყობილობა / მოწევა სიმჭიდროვე Fire Tester

    Product introduction of the Smoke Density Fire Tester

    გამოსადეგია, რომელიც გამოიყენება საზომი somke მწარმოებელ დამახასიათებელი სამშენებლო მასალა კონტროლირებად მდგომარეობის წვის ან რღვევა, და ასევე შეიძლება გამოყენებულ იქნას სხვა პლასტმასის.

    სტანდარტები 

    ASTM D 2843, DIN 4102

    Product Specification of the Smoke Density Fire Tester

    Maximum smoke density (MSD) and smoke density (SDR) for the specimen

    0-100% continuously measurable and automatically calculated

    With the standard optical correction error

    not more than 3%; each device is equipped with three standard filters, proof of light source data, representative

    Bunsen lamp working pressure

    (210 ± 5) KPa

    Bunsen lamp on the sample to impose a flame

    4min

    Automatic timing, automatic ignition, automatic smoke; luminous flux can be phased linear calibration test data more acurrate;

    Touch Screen

    5 inch effective display size 11cm wide 6.28cm; b. Resolution: 800 * 480

    communication interface

    RS232, 3.3V CMOS or TTL

    serial port d. storage capacity

    1G

    Gas source

    95% propane gas, or the same purity of the gas (customer-owned)

    Dimension

    long * wide * high 740 * 500 * high 900 (mm)

     

     

    Fetures:

    a. Size: 5 inch effective display size 11cm wide 6.28cm;

    b. Resolution: 800 * 480

    c. communication interface RS232, 3.3V CMOS or TTL, serial port

    d. storage capacity: 1G

    e. Using pure hardware FPGA driver display, "zero" start time, power can run

    f. using M3 + FPGA architecture, M3 is responsible for instruction resolution, FPGA focus TFT display, speed and reliability are leading the same kind of program

    g. The main controller uses low-power processor, automatically enter the energy-saving mode

    Product parameters of the Smoke Density Fire Tester

     იწვის ნათურა  სტუდენტებს, სინათლე, სიგრძე 260mm, nozzle დიამეტრი 0.13mm, 45 ° კუთხე ერთად მოწევა ყუთი;
     ფოტოელექტრული სისტემის  სინათლის წყარო ნათურა, ელექტრო 15W, ოპერაციული ძაბვის 6V;
     გამოსაბოლქვი სისტემა  მანქანა აღჭურვილია ძლიერი გულშემატკივართა შემდეგ ტესტი, გამონაბოლქვი შეიძლება იყოს გაწერილი outdoors;
     მოწევა სიმკვრივის საზომი დიაპაზონი  0 ~ 100%;
     მოწევა სიმკვრივის გაზომვის სიზუსტეს  ± 3%;
     მიმღები  სილიციუმის photovoltaic საკნები, სინათლის გადამცემი 0% გავლის ნათელი, სინათლის გადამცემი განაკვეთი 100% სინათლის გარეშე საფარი მთლიანად მეშვეობით;
     მთავარი burner სამუშაო წნევა  276KPa (რეგულირებადი);

  • წინა:
  • შემდეგი:

  • მოგვწერეთ თქვენი გზავნილი აქ და გამოგზავნოთ
    industrial sewing machine