SL-FL39 DIN 4102 Smoke Density Fire Tester
ಡಿಐಎನ್ 4102 ನಿರ್ಮಾಣ ಸಾಮಗ್ರಿ ದಹ್ಯತೆ ಪರೀಕ್ಷೆ ಸಲಕರಣೆ / ಸ್ಮೋಕ್ ಸಾಂದ್ರತೆ ಫೈರ್ ಟೆಸ್ಟರ್
Product introduction of the Smoke Density Fire Tester
ದಹನ ಅಥವಾ ವಿಭಜನೆಯ ನಿಯಂತ್ರಿತ ಸ್ಥಿತಿಯಲ್ಲಿದ್ದಾನೆ ವಸ್ತು ನಿರ್ಮಿಸಲು ಹಾಗೂ ದ somke ಉತ್ಪಾದಿಸುವ ವಿಶಿಷ್ಟ ಅಳೆಯುವ ಸೂಕ್ತವಾಗಿದೆ ಇತರ ಪ್ಲಾಸ್ಟಿಕ್ ಬಳಸಬಹುದು.
ಗುಣಮಟ್ಟವನ್ನು
ಎಎಸ್ಟಿಎಮ್ ಡಿ 2843, ಡಿಐಎನ್ 4102
Product Specification of the Smoke Density Fire Tester
Maximum smoke density (MSD) and smoke density (SDR) for the specimen |
0-100% continuously measurable and automatically calculated |
With the standard optical correction error |
not more than 3%; each device is equipped with three standard filters, proof of light source data, representative |
Bunsen lamp working pressure |
(210 ± 5) KPa |
Bunsen lamp on the sample to impose a flame |
4min |
Automatic timing, automatic ignition, automatic smoke; luminous flux can be phased linear calibration test data more acurrate;
|
|
Touch Screen |
5 inch effective display size 11cm wide 6.28cm; b. Resolution: 800 * 480 |
communication interface |
RS232, 3.3V CMOS or TTL |
serial port d. storage capacity |
1G |
Gas source |
95% propane gas, or the same purity of the gas (customer-owned) |
ಆಯಾಮ |
long * wide * high 740 * 500 * high 900 (mm) |
Fetures:
a. Size: 5 inch effective display size 11cm wide 6.28cm;
b. Resolution: 800 * 480
c. communication interface RS232, 3.3V CMOS or TTL, serial port
d. storage capacity: 1G
e. Using pure hardware FPGA driver display, "zero" start time, power can run
f. using M3 + FPGA architecture, M3 is responsible for instruction resolution, FPGA focus TFT display, speed and reliability are leading the same kind of program
g. The main controller uses low-power processor, automatically enter the energy-saving mode
Product parameters of the Smoke Density Fire Tester
ಬರ್ನಿಂಗ್ ದೀಪ | ವಿದ್ಯಾರ್ಥಿಗಳು ಬೆಳಕಿಗೆ ಫಾರ್, ಉದ್ದ 260mm, ಕೊಳವೆ ವ್ಯಾಸದ 0.13mm, 45 ° ಹೊಗೆ ಪೆಟ್ಟಿಗೆಯು ಕೋನ; |
ದ್ಯುತಿವಿದ್ಯುತ್ ವ್ಯವಸ್ಥೆಯ | ದೀಪ, ವಿದ್ಯುತ್ 15 W ಆಪರೇಟಿಂಗ್, ವೋಲ್ಟೇಜ್ 6 ವೊಲ್ಟ್ ಬೆಳಕಿನ ಮೂಲ; |
ನಿಷ್ಕಾಸ ವ್ಯವಸ್ಥೆಯ | ಯಂತ್ರ ಪರೀಕ್ಷೆ ನಂತರ ಹೊರಹೋಗುವ ಚೆಲ್ಲಲಾದ ಹೊರಾಂಗಣದಲ್ಲಿ ಆಗಿರಬಹುದು, ಬಲವಾದ ಅಭಿಮಾನಿಗಳ ಅಳವಡಿಸಿರಲಾಗುತ್ತದೆ; |
ಧೂಮಪಾನ ಸಾಂದ್ರತೆಯ ಅಳತೆಯ ಸಾಧನಗಳು | 0 ~ 100%; |
ಧೂಮಪಾನ ಸಾಂದ್ರತೆಯ ಮಾಪನ ನಿಖರತೆ | ± 3%; |
ಸ್ವೀಕರಿಸುವವರ | ಸಿಲಿಕಾನ್ ದ್ಯುತಿವಿದ್ಯುಜ್ಜನಕ ಕೋಶಗಳನ್ನು, ಸಂಪೂರ್ಣವಾಗಿ ಕವರ್ ಇಲ್ಲದೇ 100% ಬೆಳಕಿನ ಬೆಳಕಿನ, ಬೆಳಕಿನ ಹರಡುವಿಕೆ ಪ್ರಮಾಣ ಅಂಗೀಕಾರದ ಮೂಲಕ 0% ಬೆಳಕಿನಲ್ಲಿ ಹರಡುವಿಕೆ ಪ್ರಮಾಣ ಫಾರ್; |
ಮುಖ್ಯ ಬರ್ನರ್ ಕೆಲಸ ಒತ್ತಡದ | 276KPa (ಹೊಂದಾಣಿಕೆ); |