SL-FL39 DIN 4102 Smoke Density Fire Tester
លោកឌិន 4102 សំភារៈសំណង់ flammable ការធ្វើតេស្តសម្ភារៈ / ដង់ស៊ីតេផ្សែងអគ្គីភ័យសាកល្បង
Product introduction of the Smoke Density Fire Tester
សាកសមប្រើសម្រាប់វាស់លក្ខណៈ somke នៃការកសាងផលិតសម្ភារៈនៅក្រោមលក្ខខណ្ឌនៃការ្រំមហះឬដែលគ្រប់គ្រងដោយបំបែកហើយអាចត្រូវបានប្រើសម្រាប់ផ្លាស្ទិចផ្សេងទៀត។
ស្តង់ដា
ASTM D, 2843, ឌិន 4102
Product Specification of the Smoke Density Fire Tester
Maximum smoke density (MSD) and smoke density (SDR) for the specimen |
0-100% continuously measurable and automatically calculated |
With the standard optical correction error |
not more than 3%; each device is equipped with three standard filters, proof of light source data, representative |
Bunsen lamp working pressure |
(210 ± 5) KPa |
Bunsen lamp on the sample to impose a flame |
4min |
Automatic timing, automatic ignition, automatic smoke; luminous flux can be phased linear calibration test data more acurrate;
|
|
Touch Screen |
5 inch effective display size 11cm wide 6.28cm; b. Resolution: 800 * 480 |
communication interface |
RS232, 3.3V CMOS or TTL |
serial port d. storage capacity |
1G |
Gas source |
95% propane gas, or the same purity of the gas (customer-owned) |
វិមាត្រ |
long * wide * high 740 * 500 * high 900 (mm) |
Fetures:
a. Size: 5 inch effective display size 11cm wide 6.28cm;
b. Resolution: 800 * 480
c. communication interface RS232, 3.3V CMOS or TTL, serial port
d. storage capacity: 1G
e. Using pure hardware FPGA driver display, "zero" start time, power can run
f. using M3 + FPGA architecture, M3 is responsible for instruction resolution, FPGA focus TFT display, speed and reliability are leading the same kind of program
g. The main controller uses low-power processor, automatically enter the energy-saving mode
Product parameters of the Smoke Density Fire Tester
ចង្កៀងដុត | សម្រាប់សិស្សនិស្សិតដែលមានពន្លឺ, 260mm ប្រវែងអង្កត់ផ្ចិតក្បាល 0.13mm, មុំ 45 °ជាមួយប្រអប់ផ្សែង; |
ប្រព័ន្ធ photoelectric | ប្រភពពន្លឺសម្រាប់ចង្កៀងថាមពល 15W, ប្រតិបត្ដិការ 6V តង់ស្យុង; |
ប្រព័ន្ធផ្សង | ម៉ាស៊ីននេះត្រូវបានបំពាក់ជាមួយអ្នកគាំទ្រយ៉ាងខ្លាំងបន្ទាប់ពីការធ្វើតេស្តនេះអាចជាការផ្សងចញេឆក់; |
ជួរវាស់វែងដង់ស៊ីតេផ្សែង | 0 ~ 100%; |
ការវាស់ដង់ស៊ីតេផ្សែងភាពត្រឹមត្រូវ | ± 3%; |
អ្នកទទួល | សម្រាប់កោសិកា photovoltaic ស៊ីលីកុន, អត្រាបញ្ជូនពន្លឺនៃ 0% សម្រាប់ការអនុម័តនៃពន្លឺ, អត្រាបញ្ជូនពន្លឺនៃ 100% ពន្លឺគ្របដណ្តប់ទាំងស្រុងតាមរយៈការដោយគ្មាន! |
សម្ពាធការងារកម្មវិធីដុតចម្បង | 276KPa (លៃតម្រូវបាន); |