China SL-FL39 DIN 4102 Smoke Density Fire Tester Manufacturers and Suppliers | Skyline
industrial sewing machine

SL-FL39 DIN 4102 Smoke Density Fire Tester

Cur síos achomair:

Is féidir le Oiriúnach a úsáidtear chun tomhas a tréith somke-tháirgeadh ar ábhar tógála faoi choinníoll rialaithe dócháin nó i leith dianscaoilte, agus freisin a úsáid le haghaidh plaistigh eile.


  • Min.Order Quantity: 1 Aonad
  • Praghas: shoshannta
  • Pacáiste: Plywood Cás
  • Model: SL-FL39
  • caighdeáin: ASTM D 2843,DIN 4102
  • Sonraigh Táirge

    Táirge Clibeanna

    Trealamh Tástáil DIN 4102 Ábhair Foirgníochta inadhainteacht / Deatach Dlús Dóiteáin Tester

    Product introduction of the Smoke Density Fire Tester

    Is féidir le Oiriúnach a úsáidtear chun tomhas a tréith somke-tháirgeadh ar ábhar tógála faoi choinníoll rialaithe dócháin nó i leith dianscaoilte, agus freisin a úsáid le haghaidh plaistigh eile.

    caighdeáin 

    ASTM D 2843, DIN 4102

    Product Specification of the Smoke Density Fire Tester

    Maximum smoke density (MSD) and smoke density (SDR) for the specimen

    0-100% continuously measurable and automatically calculated

    With the standard optical correction error

    not more than 3%; each device is equipped with three standard filters, proof of light source data, representative

    Bunsen lamp working pressure

    (210 ± 5) KPa

    Bunsen lamp on the sample to impose a flame

    4min

    Automatic timing, automatic ignition, automatic smoke; luminous flux can be phased linear calibration test data more acurrate;

    Touch Screen

    5 inch effective display size 11cm wide 6.28cm; b. Resolution: 800 * 480

    communication interface

    RS232, 3.3V CMOS or TTL

    serial port d. storage capacity

    1G

    Gas source

    95% propane gas, or the same purity of the gas (customer-owned)

    Toise

    long * wide * high 740 * 500 * high 900 (mm)

     

     

    Fetures:

    a. Size: 5 inch effective display size 11cm wide 6.28cm;

    b. Resolution: 800 * 480

    c. communication interface RS232, 3.3V CMOS or TTL, serial port

    d. storage capacity: 1G

    e. Using pure hardware FPGA driver display, "zero" start time, power can run

    f. using M3 + FPGA architecture, M3 is responsible for instruction resolution, FPGA focus TFT display, speed and reliability are leading the same kind of program

    g. The main controller uses low-power processor, automatically enter the energy-saving mode

    Product parameters of the Smoke Density Fire Tester

     lampa Dó  do na mic léinn solas, fad 260mm, nozzle trastomhas 0.13mm, 45 ° uillinn leis an bosca deatach;
     córas fhótaileictreach  foinse solais don lampa, cumhacht 15W, ag oibriú 6V voltas;
     sceithchóras  Tá an meaisín feistithe le lucht leanúna láidir, tar éis an tástáil, is féidir leis an sceite bheith amuigh faoin aer scaoilte;
     Smoke raon tomhais dlúis  0 ~ 100%;
     Smoke cruinneas tomhais dlús  ± 3%;
     glacadóir  do na cealla photovoltaic sileacain, ráta tarchur solais de 0% chun an sliocht an tsolais, ráta tarchur solais an tsolais 100% gan chlúdach go hiomlán trí;
     Príomh brú oibre dóire  276KPa (adjustable);

  • Roimhe Seo:
  • : Ar Aghaidh

  • Scríobh do theachtaireacht anseo agus seol chugainn é
    industrial sewing machine