China SL-FL39 DIN 4102 Smoke Density Fire Tester Manufacturers and Suppliers | Skyline
industrial sewing machine

SL-FL39 DIN 4102 Smoke Density Fire Tester

Short Description:

Dzakakodzera kushandiswa kuyera somke-inobereka hunhu kuvaka zvinhu pasi pehurumende nemamiriro combustion kana manyowa, uye kunogona kushandiswa nevamwe mapurasitiki.


  • Min.Order Quantity: 1 chikwata
  • Price: Negotiable
  • Nhuri: Plywood Case
  • Model: SL-FL39
  • Standards: ASTM D 2843, Din 4102
  • Product Detail

    Product Tags

    Din 4102 Building Material Flammability Testing Equipment / Utsi Density Fire Tester

    Product introduction of the Smoke Density Fire Tester

    Dzakakodzera kushandiswa kuyera somke-inobereka hunhu kuvaka zvinhu pasi pehurumende nemamiriro combustion kana manyowa, uye kunogona kushandiswa nevamwe mapurasitiki.

    Standards 

    ASTM D 2843, Din 4102

    Product Specification of the Smoke Density Fire Tester

    Maximum smoke density (MSD) and smoke density (SDR) for the specimen

    0-100% continuously measurable and automatically calculated

    With the standard optical correction error

    not more than 3%; each device is equipped with three standard filters, proof of light source data, representative

    Bunsen lamp working pressure

    (210 ± 5) KPa

    Bunsen lamp on the sample to impose a flame

    4min

    Automatic timing, automatic ignition, automatic smoke; luminous flux can be phased linear calibration test data more acurrate;

    Touch Screen

    5 inch effective display size 11cm wide 6.28cm; b. Resolution: 800 * 480

    communication interface

    RS232, 3.3V CMOS or TTL

    serial port d. storage capacity

    1G

    Gas source

    95% propane gas, or the same purity of the gas (customer-owned)

    divi

    long * wide * high 740 * 500 * high 900 (mm)

     

     

    Fetures:

    a. Size: 5 inch effective display size 11cm wide 6.28cm;

    b. Resolution: 800 * 480

    c. communication interface RS232, 3.3V CMOS or TTL, serial port

    d. storage capacity: 1G

    e. Using pure hardware FPGA driver display, "zero" start time, power can run

    f. using M3 + FPGA architecture, M3 is responsible for instruction resolution, FPGA focus TFT display, speed and reliability are leading the same kind of program

    g. The main controller uses low-power processor, automatically enter the energy-saving mode

    Product parameters of the Smoke Density Fire Tester

     marambi  vadzidzi chiedza, urefu 260mm, kamwene dhayamita 0.13mm, 45 ° pakona pamwe utsi bhokisi;
     Photoelectric maitiro  chiedza mabviro nokuti rambi, simba 15W, kushanda voltage 6V;
     pedza maitiro  mumuchina akashongedzerwa ane simba kurudza mushure bvunzo, kuti chiutsi zvinogona pauri kunze;
     Utsi arambe achirema chipimo Range  0 ~ 100%;
     Utsi arambe achirema chipimo zvakarurama  ± 3%;
     mugamuchiri  nokuti nesilicon photovoltaic masero, chiedza hutachiwana yevanhu 0% nokuda kwemutemo chiedza, chiedza hutachiwana yevanhu 100% chiedza pasina chifukidziro chose kuburikidza;
     Main burner vanoshanda nevezera  276KPa (chinjika);

  • Previous:
  • Next:

  • Nyora mashoko ako pano uye ugozvitumira kwatiri
    industrial sewing machine