SL-FL25 Heat Transfer Index Test Apparatus
Heat Transfer Index Test Apparatus for Evaluate the Thermal Protection Performance of Protective Clothing Fabrics
Product introduction of the Heat Transfer Index Test Apparatus
A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index provides a method of grading materials which does not imply that the material tested will give any precise protective time under actual use conditions.
The convective heat resistance test device is developed according to EN367 and ISO9151 test standards, and meets the requirements of the convective heat resistance test standard of domestic AQ 6103-2007 welder protective gloves. The test results are thermal protection index (HTI). The principle of the test is to measure the test time required for the back temperature of the sample to rise 12 or 24 degrees by the impact of flame on the bottom of the sample. The average value of the three tests is recorded as thermal protection index (HTI), which is used to evaluate the thermal protection performance of the protective clothing fabric.
Produkt parametrar för Heat Transfer Index Test Apparatus
Standards | AQ 6103, ISO 9151: 1995, CSN EN 367: 1992 |
Ansökan | Safety Protection |
storlek | 600 * 100 * 600mm (B * H * D) |
Vikt | 27kg |
elektriska krav | 220V, 50HZ |
Installation | Dragskåp placering |
Tidsintervall | 0-100s |
Provstorlek | 140 x 140 mm |
Gaskälla Krav | Propan och Kompressor Gas |
Calorimeter diameter | Φ40 |
testmiljö | 25 + 5 ℃ |
Produkt Feature of the Heat Transfer Index Test Apparatus
Den kan visa flamtemperaturen, mäta temperatur och tid digitalt.
Apparaten är konstruerad och tillverkad i enlighet med EN 367 och ISO9151 standarder.
Apparaten består av brännaren, täckarket och provhållaren med koppar kalorimeter.
Täckarket och provhållare styrs via pneumatisk överföring som automatiskt styrs av programvara.
En horisontellt orienterad testprovet utsätts för ett infallande värmeflöde av 80 kW / ㎡from flamman från en Meker brännare under den.
Värmen som passerar genom provet mäts med hjälp av en liten kopparkalorimeter ovanpå och kontakt med provet.
Tiden för att spela in en temperaturökning på 12 eller 24 ℃ i kalorimetern registreras i sekunder.
Kalorimetern kylanordning förkorta testtiden.
Den genomsnittliga resultatet för de tre provkroppar beräknas som HTI.
Kalibrering av värmeflödet täthet av 80 kW / ㎡is utförs automatiskt av softwa
Instrument egenskaper
Produkt application of the Heat Transfer Index Test Apparatus
Den konvektiva värmebeständighet testanordning för skyddsmaterial är ett instrument som främst används för att mäta den konvektiva värmebeständigheten hos textilier, brandbekämpnings leveranser och andra material.