SL-FL25 Heat Transfer Index Test Apparatus
Heat Transfer Index Test Apparatus for Evaluate the Thermal Protection Performance of Protective Clothing Fabrics
Product introduction of the Tepelné Index Testovací prístroj
A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index provides a method of grading materials which does not imply that the material tested will give any precise protective time under actual use conditions.
The convective heat resistance test device is developed according to EN367 and ISO9151 test standards, and meets the requirements of the convective heat resistance test standard of domestic AQ 6103-2007 welder protective gloves. The test results are thermal protection index (HTI). The principle of the test is to measure the test time required for the back temperature of the sample to rise 12 or 24 degrees by the impact of flame on the bottom of the sample. The average value of the three tests is recorded as thermal protection index (HTI), which is used to evaluate the thermal protection performance of the protective clothing fabric.
Sériové parametre Tepelné Index Testovací prístroj
štandardy | AQ 6103, ISO 9151: 1995, STN EN 367: 1992 |
prihláška | Ochrana bezpečnosti |
veľkosť | 600 * 100 * 600 mm (š * v * D) |
závažia | 27kg |
požiadavky na elektrickú | 220V, 50 Hz |
inštalácia | Dym umiestnenie kapucňa |
Časový rozsah | 0-100s |
Veľkosť vzorky | 140 x 140 mm |
Požiadavky na plyn Zdroj | Propán a vzduchového kompresora plynovej |
priemer kalorimeter | Φ40 |
testovacie prostredie | 25 + 5 ℃ |
Sériové Feature of the Tepelné Index Testovací prístroj
môže zobrazovať teplotu plameňa, meranie teploty a času digitálne.
Prístroj je navrhnutý a vyrobený podľa normy EN 367 a noriem ISO9151.
Prístroj sa skladá z horáka, krycou vrstvou a držiaku vzoriek s medeným kalorimetra.
Krycia vrstva a držiak vzorky sú riadené pomocou pneumatického prenosu, ktoré je automaticky riadené softvérom.
Horizontálne orientovaným Skúšobná vzorka podrobí dopadajúce tepelnom toku 80 kW / ㎡from plameň horáka Meker pod ním.
Teplo prechádza vzorky sa meria pomocou malého medeného kalorimetra na hornej a styku s vzorkou.
Doba zaznamenať zvýšenie teploty z 12 alebo 24 ℃ v kalorimetra sa zaznamenáva v sekundách.
Zariadenie kalorimeter chladenie skráti testovací čas.
Priemerný výsledok troch testovacích vzoriek sa vypočíta ako HTI.
Kalibrácia hustoty tepelného toku 80 kW / ㎡is vykonávané automaticky Softwa
Instrument charakteristiky
Sériové application of the Tepelné Index Testovací prístroj
Konvekčné tepelný odpor testovacie zariadenie pre ochranné materiály, je nástroj, ktorý sa používa predovšetkým na meranie konvekčného tepelnú odolnosť textilu, požiarnych dodávok a iných materiálov.