SL-FL25 Heat Transfer Index Test Apparatus
Heat Transfer Index Test Apparatus for Evaluate the Thermal Protection Performance of Protective Clothing Fabrics
Product introduction of the Heat Transfer Index Test Aparatet
A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index provides a method of grading materials which does not imply that the material tested will give any precise protective time under actual use conditions.
The convective heat resistance test device is developed according to EN367 and ISO9151 test standards, and meets the requirements of the convective heat resistance test standard of domestic AQ 6103-2007 welder protective gloves. The test results are thermal protection index (HTI). The principle of the test is to measure the test time required for the back temperature of the sample to rise 12 or 24 degrees by the impact of flame on the bottom of the sample. The average value of the three tests is recorded as thermal protection index (HTI), which is used to evaluate the thermal protection performance of the protective clothing fabric.
Produkt parametrat e Heat Transfer Index Test Aparatet
standardet | AQ 6103, ISO 9151: 1995, CSN EN 367: 1992 |
Aplikacion | Mbrojtja Siguria |
madhësi | 600 * 100 * 600mm (W * H * D) |
peshë | 27kg |
kërkesat elektrike | 220V, 50Hz |
instalim | Tym vendosje hood |
varg Koha | 0-100s |
Madhësia e mostrës | 140 x 140 mm |
Kërkesat Gas Burimi | Propan dhe Air Compressor Gas |
Kalorimetri diametër | Φ40 |
mjedisi Testing | 25 + 5 ℃ |
Produkt Feature of the Heat Transfer Index Test Aparatet
Ajo mund të shfaqin temperaturë flaka, temperatura të matur dhe kohën digjitale.
Aparati është projektuar dhe prodhuar sipas EN 367 dhe ISO9151 standardeve.
Aparati përbëhet nga furrë, fletë mbuluar dhe mbajtësit mostër me Kalorimetri bakrit.
Fletë të mbuluar dhe mbajtësi mostër janë të kontrolluara nëpërmjet transmetimit pneumatike cili kontrollohet automatikisht nga software.
Një ekzemplar orientuar horizontalisht testit nënshtrohen një fluksit të nxehtësisë incident të 80KW / ㎡from flakën e një furrë Meker nën atë.
Vapa kalon përmes modelit matet me anë të një Kalorimetri të vogël të bakrit në krye të dhe kontaktit me modelin.
Koha për të regjistruar një rritje të temperaturës prej 12 ose 24 ℃ në Kalorimetri është regjistruar në sekonda.
Pajisja Kalorimetri ftohjes shkurtojnë kohën test.
Rezultati mesatare për tre mostrave të provës është llogaritur si HTI.
Kalibrimi i densitetit të fluksit të nxehtësisë prej 80 kW / ㎡is kryhet automatikisht nga softwa
Instrumenti Karakteristikat
Produkt application of the Heat Transfer Index Test Aparatet
Pajisja convective provë rezistenca e ngrohjes për materiale mbrojtëse është një instrument që përdoret kryesisht për të matur rezistencën konvektive ngrohjes e tekstileve, furnizimet kundër zjarrit dhe materiale të tjera.