SL-FL25 Heat Transfer Index Test Apparatus
Heat Transfer Index Test Apparatus for Evaluate the Thermal Protection Performance of Protective Clothing Fabrics
Product introduction of the نقل الحرارة اختبار مؤشر جهاز
A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index provides a method of grading materials which does not imply that the material tested will give any precise protective time under actual use conditions.
The convective heat resistance test device is developed according to EN367 and ISO9151 test standards, and meets the requirements of the convective heat resistance test standard of domestic AQ 6103-2007 welder protective gloves. The test results are thermal protection index (HTI). The principle of the test is to measure the test time required for the back temperature of the sample to rise 12 or 24 degrees by the impact of flame on the bottom of the sample. The average value of the three tests is recorded as thermal protection index (HTI), which is used to evaluate the thermal protection performance of the protective clothing fabric.
المنتج المعلمات من نقل الحرارة اختبار مؤشر جهاز
المعايير | عبد القدير 6103، ISO 9151: 1995، CSN EN 367: 1992 |
تطبيق | حماية سلامة |
بحجم | 600 * 100 * 600MM (W * H * D) |
وزن | 27KG |
متطلبات كهربائية | 220V، 50HZ |
التركيب | الدخان وضع غطاء محرك السيارة |
النطاق الزمني | 0-100s |
حجم العينة | 140 × 140 مم |
متطلبات المصدر الغاز | البروبان والهواء ضاغط الغاز |
قطر المسعر | Φ40 |
بيئة الاختبار | 25 + 5 ℃ |
المنتج Feature of the نقل الحرارة اختبار مؤشر جهاز
ويمكن عرض درجة حرارة اللهب، ودرجة الحرارة قياس والوقت رقميا.
تم تصميم الجهاز وتصنيعها وفقا لEN 367 و ISO9151 المعايير.
يتكون الجهاز من الموقد، ورقة غلاف وحامل العينة مع المسعر النحاس.
يتم التحكم في ورقة غطاء وحامل العينات عن طريق نقل هوائي الذي يتم التحكم تلقائيا بواسطة برنامج.
عينة اختبار الموجهة أفقيا تعرض لتدفق الحرارة الحادث من 80KW / ㎡from شعلة الموقد Meker تحتها.
يتم قياس الحرارة التي تمر عبر عينة عن طريق المسعر النحاسية الصغيرة على رأس والاتصال مع عينة.
الوقت لتسجيل ارتفاع درجة حرارة 12 أو 24 ℃ في المسعر يتم تسجيلها في ثواني.
جهاز المسعر التبريد تقصير وقت الاختبار.
يتم حساب النتيجة يعني لعينات الاختبار ثلاث باسم HTI.
معايرة كثافة تدفق الحرارة من 80 كيلوواط / ㎡is تنفيذ تلقائيا من قبل softwa
صك خصائص
المنتج application of the نقل الحرارة اختبار مؤشر جهاز
المقاومة للحرارة جهاز اختبار الحمل الحراري للمواد واقية هو أداة الذي يستخدم بشكل رئيسي لقياس مقاومة الحرارة الحمل الحراري المنسوجات والمستلزمات مكافحة الحرائق وغيرها من المواد.