SL-FL25 Heat Transfer Index Test Apparatus
Heat Transfer Index Test Apparatus for Evaluate the Thermal Protection Performance of Protective Clothing Fabrics
Product introduction of the Heat Transfer Index Test Apparatus
A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index provides a method of grading materials which does not imply that the material tested will give any precise protective time under actual use conditions.
The convective heat resistance test device is developed according to EN367 and ISO9151 test standards, and meets the requirements of the convective heat resistance test standard of domestic AQ 6103-2007 welder protective gloves. The test results are thermal protection index (HTI). The principle of the test is to measure the test time required for the back temperature of the sample to rise 12 or 24 degrees by the impact of flame on the bottom of the sample. The average value of the three tests is recorded as thermal protection index (HTI), which is used to evaluate the thermal protection performance of the protective clothing fabric.
Product parametrləri Heat Transfer Index Test Apparatus
Standards | AQ 6103, ISO 9151: 1995, CSN EN 367: 1992 |
ərizə | Safety Müdafiə |
boy | 600 * 600mm 100 (W * H * D) |
çəki | 27KG |
Elektrik tələblər | 220V, 50Hz |
quraşdırma | Fume başlıq yerləşdirilməsi |
Time sıra | 0-100s |
Nümunə ölçüsü | 140 x 140 mm |
Gas Source tələblər | Propan və Air Compressor Gas |
kalorimetre diametri | Φ40 |
Test ətraf mühit | 25 + 5 ℃ |
Product Feature of the Heat Transfer Index Test Apparatus
Bu digital alov temperatur, ölçü temperatur və vaxt bilərsiniz.
Aparat EN 367 və ISO9151 standartlara uyğun hazırlanmış və istehsal olunur.
Aparat burner əhatə hesabatı və mis kalorimetre ilə nümunələri sahibi ibarətdir.
Cover sheet və nümunələri sahibi avtomatik proqram tərəfindən nəzarət olunur pnevmatik ötürülməsi vasitəsilə nəzarət edilir.
80KW bir hadisə istilik flux məruz A üfüqi yönümlü test nümunələri / onun altında bir Meker burner alov ㎡from.
Nümunələri keçən istilik nümunələri ilə üst və əlaqə kiçik bir mis kalorimetre vasitəsilə ölçülür.
Vaxt 12 və ya 24 bir temperatur artımı qeyd ℃ kalorimetre saniyə qeyd olunur.
Calorimeter soyutma cihaz test vaxt qısalda bilər.
Üç test nümunələri üçün orta nəticə HTI kimi hesablanır.
80 kVt istilik axını sıxlığı kalibrləmə / softwa avtomatik həyata ㎡is
Instrument xüsusiyyətləri
Product application of the Heat Transfer Index Test Apparatus
qoruyucu materialların convective istilik müqavimət test cihaz əsasən tekstil yanğınsöndürmə təchizatı və digər materialların convective istilik müqavimət ölçmək üçün istifadə olunur ki, bir alətdir.