SL-FL25 Heat Transfer Index Test Apparatus
Heat Transfer Index Test Apparatus for Evaluate the Thermal Protection Performance of Protective Clothing Fabrics
Product introduction of the Heat Transfer Indeks Testna Aparati
A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index provides a method of grading materials which does not imply that the material tested will give any precise protective time under actual use conditions.
The convective heat resistance test device is developed according to EN367 and ISO9151 test standards, and meets the requirements of the convective heat resistance test standard of domestic AQ 6103-2007 welder protective gloves. The test results are thermal protection index (HTI). The principle of the test is to measure the test time required for the back temperature of the sample to rise 12 or 24 degrees by the impact of flame on the bottom of the sample. The average value of the three tests is recorded as thermal protection index (HTI), which is used to evaluate the thermal protection performance of the protective clothing fabric.
Izdelek parametri Heat Transfer Indeks Testna Aparati
standardi | AQ 6103, ISO 9151: 1995, CSN EN 367: 1992 |
uporaba | Varovalna |
velikost | 600 * 100 * 600mm (W * H * D) |
Utež | 27KG |
Električne zahteve | 220V, 50Hz |
namestitev | Dima umestitev napa |
razpon časa | 0-100s |
Velikost vzorca | 140 x 140 mm |
Plin Vir Zahteve | Propana in zračni kompresor plin |
premer kalorimeter | Φ40 |
testno okolje | 25 + 5 ℃ |
Izdelek Feature of the Heat Transfer Indeks Testna Aparati
se lahko prikaže temperaturo plamena, temperaturo ukrep in čas digitalno.
Aparat je zasnovan in izdelan v skladu z EN 367 in standardi ISO9151.
Aparat je sestavljen iz gorilnika, pokrovnim listom in vzorčnim držalo z bakrenimi kalorimetrom.
Pokrov stanja in vzorci imetnik nadzoruje preko pnevmatsko prenosa, ki je programska oprema samodejno kontrolirano.
Vodoravno usmerjeni preizkušancu, na vpadni toplotnega toka 80kW / ㎡from plamen Meker gorilnika pod njim.
Toplota prehaja skozi vzorcu se meri s pomočjo majhnega bakra kalorimeter na vrhu in v stiku z vzorcem.
Čas za snemanje dvig temperature nad 12 ali 24 ℃ v kalorimetrom se zabeleži v sekundah.
Naprava kalorimeter hlajenje skrajšati čas preskusa.
Povprečni rezultat treh preskušancih se izračuna kot HTI.
Kalibracija gostote toplotnega toka 80 kW / ㎡is samodejno izvede softwa
Instruments lastnosti
Izdelek application of the Heat Transfer Indeks Testna Aparati
Konvektivni odpornost na vročino testna naprava za zaščitne snovi je instrument, ki se uporablja predvsem za merjenje konvekcijsko toplotno odpornost tekstila, požarnih dobave požarov in drugih materialov.