Heat Transfer Index Test Apparatus
Heat Transfer Index Test Apparatus for Evaluate the Thermal Protection Performance of Protective Clothing Fabrics
Product introduction of the حرارت کی منتقلی انڈیکس ٹیسٹ اپریٹس
A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index provides a method of grading materials which does not imply that the material tested will give any precise protective time under actual use conditions.
The convective heat resistance test device is developed according to EN367 and ISO9151 test standards, and meets the requirements of the convective heat resistance test standard of domestic AQ 6103-2007 welder protective gloves. The test results are thermal protection index (HTI). The principle of the test is to measure the test time required for the back temperature of the sample to rise 12 or 24 degrees by the impact of flame on the bottom of the sample. The average value of the three tests is recorded as thermal protection index (HTI), which is used to evaluate the thermal protection performance of the protective clothing fabric.
مصنوعات کے پیرامیٹرز حرارت کی منتقلی انڈیکس ٹیسٹ اپریٹس
معیارات | AQ 6103، ISO 9151: 1995، CSN EN 367: 1992 |
درخواست | سیفٹی تحفظ |
سائز | 600 * 100 * 600MM (W * H * D) |
وزن | 27KG |
بجلی کی ضروریات | 220V، 50HZ |
تنصیب | دوآن ہڈ جگہ کا تعین |
وقت کی حد | 0-100s |
نمونہ سائز | 140 X 140 ملی میٹر |
گیس کے ذریعہ تقاضے | پروپین اور ایئر کمپریسر گیس |
ؤشماماپی قطر | Φ40 |
ٹیسٹنگ ماحول | 25 + 5 ℃ |
مصنوعات Feature of the حرارت کی منتقلی انڈیکس ٹیسٹ اپریٹس
یہ ڈیجیٹل شعلے درجہ حرارت کی پیمائش درجہ حرارت اور وقت ظاہر کر سکتے ہیں.
اپریٹس EN 367 اور ISO9151 معیار کے مطابق ڈیزائن اور تیار کیا جاتا ہے.
اپریٹس برنر، کور شیٹ اور تانبے ؤشماماپی ساتھ نمونہ ہولڈر پر مشتمل ہے.
کور شیٹ اور نمونہ ہولڈر خود کار طریقے سے سافٹ ویئر کی طرف سے کنٹرول کیا جاتا ہے جس نیومیٹک ٹرانسمیشن کے ذریعے کنٹرول کیا جاتا ہے.
80KW کے ایک واقعے گرمی بہاؤ کا نشانہ ایک افقی مبنی ٹیسٹ کے نمونے / اس کے نیچے ایک Meker برنر کے شعلے ㎡from.
گرمی نمونہ سے گزرنے نمونہ ساتھ کے سب اور رابطے پر ایک چھوٹے تانبے ؤشماماپی کے اسباب کی طرف سے ماپا جاتا ہے.
وقت 12 یا 24 کی ایک درجہ حرارت میں اضافہ ریکارڈ کرنے ℃ ؤشماماپی میں سیکنڈ میں ریکارڈ کیا جاتا ہے.
ؤشماماپی کولنگ آلہ ٹیسٹ کے وقت قصر.
تین ٹیسٹ نمونوں کے لئے اوسط نتیجہ HTI کے طور پر شمار کیا جاتا ہے.
80 کلو واٹ کی گرمی بہاؤ کی کثافت کی انشانکن / softwa کی طرف سے خود کار طریقے سے کارکردگی کا مظاہرہ ㎡is
آلے کی خصوصیات
مصنوعات کی درخواست of the حرارت کی منتقلی انڈیکس ٹیسٹ اپریٹس
حفاظتی مواد کے لئے convective گرمی مزاحمت ٹیسٹ آلہ بنیادی طور پر ٹیکسٹائل، آگ بجھانا چیزیں اور دیگر مواد کی convective گرمی کے خلاف مزاحمت کی پیمائش کرنے کے استعمال کیا جاتا ہے جس میں ایک آلہ ہے.