Heat Transfer Index Test Apparatus
Heat Transfer Index Test Apparatus for Evaluate the Thermal Protection Performance of Protective Clothing Fabrics
Product introduction of the Heat Transfer Index vizsgálati berendezés
A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index provides a method of grading materials which does not imply that the material tested will give any precise protective time under actual use conditions.
The convective heat resistance test device is developed according to EN367 and ISO9151 test standards, and meets the requirements of the convective heat resistance test standard of domestic AQ 6103-2007 welder protective gloves. The test results are thermal protection index (HTI). The principle of the test is to measure the test time required for the back temperature of the sample to rise 12 or 24 degrees by the impact of flame on the bottom of the sample. The average value of the three tests is recorded as thermal protection index (HTI), which is used to evaluate the thermal protection performance of the protective clothing fabric.
Termék paraméterei Heat Transfer Index vizsgálati berendezés
szabványok | AQ 6103, ISO 9151: 1995, EN 367 CSN: 1992 |
Alkalmazás | Biztonsági védelem |
méret | 600 * 100 * 600 mm-es (W * H * D) |
Súly | 27kg |
Elektromos követelmények | 220V, 50HZ |
Telepítés | Elszívófülkében elhelyezés |
Időtartományban | 0-100s |
Minta nagysága | 140 x 140 mm-es |
Gáz Forrás követelmények | Propán és légkompresszor Gas |
kaloriméter átmérő | Φ40 |
tesztkörnyezet | 25 + 5 ℃ |
Termék Feature of the Heat Transfer Index vizsgálati berendezés
tud megjeleníteni a láng hőmérséklete, intézkedés hőmérséklet és az idő digitálisan.
A berendezés úgy tervezték és gyártották az EN 367 és ISO9151 szabványoknak.
A berendezés áll az égő, a fedőlap és a mintatartó réz kaloriméter.
A fedlap és a mintatartó vezérelhető pneumatikus továbbítás, amely automatikusan vezérli szoftver.
A vízszintesen orientált vizsgálati mintadarab egy beeső hőáram a 80 kW-os / ㎡from lángjában Meker égő alatta.
A hő áthaladó minta segítségével mérjük egy kis réz kaloriméter a tetején, és érintkezik a mintával.
Az idő rögzítése a hőmérséklet-emelkedés 12 vagy 24 ℃, a kaloriméter másodpercekben feljegyezzük.
A kaloriméter hűtőkészülék lerövidíti a vizsgálati idő.
Az átlagos eredmény a három vizsgált minták alapján kerül kiszámításra HTI.
A kalibrációs hőáramlás sűrűsége 80 kW / ㎡is automatikusan végzi Softwa
eszköz jellemzőit
termék alkalmazása of the Heat Transfer Index vizsgálati berendezés
A konvektív ellenállás tesztlap védőanyagokhoz olyan eszköz, amely elsősorban mérésére konvektív hőállósága textíliák, tűzoltó felszerelések és egyéb anyagokat.