EN ISO 9239-1 Radiant Flooring Panel Test Apparatus
Radiant Flooring Panel Test Apparatus Stainless Steel Hood with Smoke Measurement Ports
Product parameters (specifications)of the the Radiant Flooring Panel Test Apparatus
Maksimòm pouvwa opere | 5KW |
distribisyon presizyon | <1S / h |
Chalè Flux mèt Mezire seri | (0-15) Kw / m2; (Koule chalè kliyan-posede) |
Chalè règ mèt presizyon | ± 0.2Kw / m2 |
Chalè règ mèt presizyon | <± 3%; |
Chalè seri radyasyon piromètr | 400-600 ℃, presizyon nan ± 0.5 ℃; |
Nwa kò erè tanperati | ± 5 ℃; |
vitès lafimen | (2.5 ± 0.2) m / s |
kapasite lafimen | (39-85) m3 / min |
Ki mouye REFRACTORY gwosè tablo radyasyon | 300mm × 450mm, the ability of about 900 ℃ high temperature; |
Thermocouple | dyamèt ki 3.2mm K-kalite asye pur blende tèrmokapteur |
Burning flanbo | dyamèt ¢ 10mm dyamèt ¢ 6mm, espre tib sou twou a 35 ¢ 0.7mm |
wotè flanm dife | 60 ~ 120mm reglabl |
avèk tès pou alkòl sistèm | vòltaj segondè elektwonik ignisyon |
Burning gwosè bwat | L1420 * W1200 * H2300 (mm) |
Bonjan sistèm tiyo echapman | se machin nan ekipe ak yon fanatik fò, lè se tès ou fin ranpli a, kòmanse sistèm nan tiyo echapman fanatik yo pral deyò fin itilize |
Pwodwi entwodiksyon nan Radiance planche Panel Egzamen Apparatus
ISO 9239 Tès la Radiance planche Panel se yon eleman enpòtan nan reyaksyon an materyèl planche a tès dife nan sistèm lan Euroclass. Egzamen sa a mezire gaye nan flanm dife nan echantiyon an, anba ekspoze tèmik, lè l sèvi avèk yon klere byen bèl sous chalè ignisyon. ekspoze a tèmik se ke nan yon dife k ap grandi nan sal la ki gen orijin ki nan yon ouvèti pòt, reyon sou sol yo nan yon chanm adjasan oswa koridò. ka aparèy la tou gen pou itilize pou tès nan estanda ASTM E648 ak DIN 4102; Pati 14.
Use Environment
Andedan kay la itilize
Altitid: jiska 2000m
tanperati anbyen: 10 a 35 ° C (60 a 85 ° F)
Imidite relatif: 45% ~ 75%.
Otorize fluctuations vòltaj: 10% nan rated vòltaj.
Ovèrvoltaj Rating: II
Polisyon degre: 1
Pwodwi Feature ak Aplikasyon nan Radiant Flooring Panel Egzamen Apparatus
Se 1.The chanm tès ki kapab lakòz izole ak kalsyòm silikate tablo izolasyon epi li se bay ak yon fenèt rezistan obsèvasyon tanperati.
2.The stainless steel sample support assembly is mounted on a sliding platform to allow safe and easy loading of the test sample.
3.The radiant heat is applied by means of a gas-fuelled panel, inclined at 30º, and directed at a horizontally mounted floor covering system specimen.
4.The radiant panel generates a radiant energy flux distribution ranging from a nominal maximum of 10.9 kW/m2 to a minimum of 1.1 kW/m2.
5.Dummy calibration specimen with holder, calibrated heat flux meter and mounting.
6.The distance burned until flame-out is reached and converted, by calibration, into an equivalent critical radiant flux, in kW/m2.
7.Heat Flux Meter: Range : 0 ~ 50 kw/m2; Surface emissivity :ε=0.95± 0.05
8.A smoke measuring system, according to DIN 50055, is mounted on a separate frame at the exhaust stack.
9.Control Rack for convenience in use, allowing observation of the apparatus and controls during equipment set-up and calibration.
10.Automatic ignition of the radiant panel and safety cut-out.
11.Automatic moving T type ignition burner
12.Stainless steel hood with smoke measurement ports.
Aplikasyon: Appareils nan FRP planche radyan Panel Tès se yon enstriman ki kapab itilize detèmine ekivalan radyasyon an tèmik nan kapèt, planche materyèl, ak twati materyèl izolasyon ke yo Latexo gaye nan flanm dife a.
Product Details of the Radiant Flooring Panel Egzamen Apparatus
se tèsteur la radyasyon tèmik pou pavaj materyèl aplike nan kritik tèmik mezi a radyasyon règ nan tè a kouvri materyèl. règ la kritik radyan refere a chalè a ensidan pou chak zòn inite. pi gwo chalè a nan ensidan, ki pi wo kantite lajan an nan chofaj obligatwa pou materyèl la, ak ki estab nan plis materyèl la. mwens chans a li se trape dife. Nan aparèy egzamen an, yon chalè sous radyasyon ak yon T-kalite brûler yo enstale, ak pi lwen nan echantiyon an se soti nan sous la radyasyon, pi ba a radyasyon nan chalè Flux resevwa sou sifas la, se echantiyon an deklanche pa T-kalite a brûler, epi li se tès la fèt. Lè yo flanm dife a extend, distans la domaj nan echantiyon an, ki koresponn radyasyon chalè valè nan règ, se sa ki, kritik règ la radyasyon chalè.
Appareils nan FRP planche radyan Panel Egzamen satisfè metòd yo tès sa yo:
ISO 9239-1:Floor coverings - Fire reaction test - Part 1: Determination of flaming performance using radiant heat sources;
ASTM E648:The floor covering is subjected to a critical thermal radiation test using a thermal radiation source method;
GB/T 11785:Determination of the burning properties of flooring materials - radiant heat source method.
Dimension:1900mm (W) x 750mm x (H) x 2120mm (D)
Pwa: 235kg
kondisyon Enstalasyon
Gwosè Enstalasyon (mm)
bwat Egzamen gwosè :: 1800 (L) * 1500 (W) * 2400 (H)
Elektrik kontwòl kabinè gwosè: 600 (L) * 1000 (W) * 1800 (H)
kondisyon Enstalasyon
Ekipman pou pouvwa: 220 V±10%,50 Hz,5A
kondisyon Air sous
Ki degaje konbisyon gaz: estanda gaz pwopàn, pousantaj moun ki koule ekipman se pa mwens pase 5L / min, ak presyon nan gaz Inlet se pa mwens pase 0.15MPa;
Compressed air: the air force of the intake air is not less than 0.5MPa, and the flow rate is not less than 180L/min;
Water source: dedicated coolant for cooling the heat flow meter.
Elèktrik: 230 vòlt Nominal 10 anpli
Anbyen Tanperati: Opere 10 ° C rive nan 35 ° C
Dimensions: Apparatus: 1900mm (W) x 750mm x (H) x 2120mm (D)
gaz Pwodwi pou: Pwopàn ak COMPRESSOR lè
kondisyon sistèm emisyon gaz
Emisyon gaz tiyo: kalib 30cm, vitès van 2.5m / s, wotè soti nan tè a se 2.4m.
What is the ISO 9239-1:2010?
ISO 9239-1:2010 specifies a method for testing the upwind combustion behavior and flame spread of horizontally installed floors exposed to heat flux radiation gradients in a laboratory, when ignited with a pilot flame.
This method works for all types of floors. Examples include textile carpets, cork, wood, rubber and plastic coverings and coatings. The results obtained by this method reflect the performance of the floor, including any substrates (if used). Modifications to the backing, adhesion to the substrate, other changes to the underlayment or floor may affect the test results.