EN ISO 9239-1 Radiant Flooring Panel Test Apparatus
Radiant Flooring Panel Test Apparatus Stainless Steel Hood with Smoke Measurement Ports
Product parameters (specifications)of the the Radiant Flooring Panel Test Apparatus
| Oke ọrụ ike | 5kw |
| oge ziri ezi | <1s / h |
| Okpomọkụ flọksi mita Atụ nso | (0-15) KW / m2; (Okpomọkụ eruba ahịa-ekesịpde) |
| Okpomọkụ agbanwe oge mita ziri ezi | ± 0.2Kw / m2 |
| Okpomọkụ agbanwe oge mita ziri ezi | <± 3%; |
| Okpomọkụ radieshon pyrometer nso | 400-600 ℃, izi ezi nke ± 0,5 ℃; |
| Black ahu okpomọkụ njehie | ± 5 ℃; |
| anwụrụ ọkụ na-agba | (2,5 ± 0,2) m / s |
| anwụrụ ọkụ ikike | (39-85) m3 / min |
| Porous refractory radieshon osisi size | 300mm × 450mm, the ability of about 900 ℃ high temperature; |
| Thermocouple | dayameta nke 3.2mm K-ụdị igwe anaghị agba nchara armored thermocouple |
| Burning ọwa | dayameta ¢ 10mm diameter ¢ 6mm, ịgba tube na 35 ¢ 0.7mm oghere |
| ire ọkụ elu | 60 ~ 120mm mgbanwe |
| mgbanye usoro | elu voltaji electronic mgbanye |
| Burning igbe size | L1420 * W1200 * H2300 (mm) |
| Strong iyuzucha usoro | igwe na-onwem na a siri ike na-akwado, mgbe ule na-agwụ agwụ, na-amalite na iyuzucha akwado usoro ga-agwụ n'èzí |
Product iwebata nke Ụtọ flooring Panel Test ngwa
The ISO 9239 Ụtọ flooring Panel ule bụ nkume isi nkuku nke flooring ihe mmeghachi omume ọkụ ule na Euroclass usoro. The ule jikoro mgbasa nke ire ọkụ nke sample, n'okpuru thermal ikpughe, eji a radiant okpomọkụ mgbanye isi iyi. The thermal ikpughe bụ na nke a ọkụ na-eto eto n'ime ụlọ nke si na site na a ụzọ mmeghe, ọchị na na floorings na ihe n'akụkụ ụlọ ma ọ bụ paseji. The ngwa nwekwara ike-eji maka ule ụkpụrụ ASTM E648 na DIN 4102; Part 14.
Use Environment
Ime ụlọ were
elu: ruo 2000m
Ihere okpomọkụ: 10 ruo 35 ° C (60 85 ° F)
ikwu iru mmiri: 45% ~ 75%.
Kwere voltaji fluctuations: 10% of gosiri voltaji.
Overvoltage fim: II
Mmetọ ogo: 1
Product Njirimara na Ngwa nke Radiant Flooring Panel Test ngwa
1.The n'ihi ule ulo a gwara mmanụ na calcium silicate mkpuchi osisi na a na-nyere na a okpomọkụ na-eguzogide ọgwụ chọpụtara window.
2.The stainless steel sample support assembly is mounted on a sliding platform to allow safe and easy loading of the test sample.
3.The radiant heat is applied by means of a gas-fuelled panel, inclined at 30º, and directed at a horizontally mounted floor covering system specimen.
4.The radiant panel generates a radiant energy flux distribution ranging from a nominal maximum of 10.9 kW/m2 to a minimum of 1.1 kW/m2.
5.Dummy calibration specimen with holder, calibrated heat flux meter and mounting.
6.The distance burned until flame-out is reached and converted, by calibration, into an equivalent critical radiant flux, in kW/m2.
7.Heat Flux Meter: Range : 0 ~ 50 kw/m2; Surface emissivity :ε=0.95± 0.05
8.A smoke measuring system, according to DIN 50055, is mounted on a separate frame at the exhaust stack.
9.Control Rack for convenience in use, allowing observation of the apparatus and controls during equipment set-up and calibration.
10.Automatic ignition of the radiant panel and safety cut-out.
11.Automatic moving T type ignition burner
12.Stainless steel hood with smoke measurement ports.
Ngwa: The FRP flooring Ụtọ Panel Test ngwa bụ ngwá na ike ga-eji na-ekpebi Ẹkot thermal radieshon nke kapet, flooring ihe, na roofing mkpuchi ihe na-mpụta agbasawo ire ọkụ.
Product Details of the Radiant Flooring Panel Test ngwa
The thermal radieshon tester maka emeghere ihe a na-etinyere na oké egwu thermal radieshon agbanwe oge n'ihe nke ala gụchaa. The oké egwu radiant agbanwe oge na-ezo aka ahụ merenụ okpomọkụ kwa unit n'ógbè. The ukwuu merenụ okpomọkụ, dị elu nke kpo oku ego chọrọ maka ihe onwunwe, na ndị ọzọ mụ na ihe onwunwe. The o yiri ka ọ bụ enwetaghị ọkụ. Na ule ngwaọrụ, a okpomọkụ radieshon isi iyi na a T-ụdị burner na-arụnyere, na anya n'ebe ndị sample si radieshon iyi, na belata okpomọkụ radieshon agbanwe oge natara n'elu, na sample na-amụnyewo site T-ụdị burner, na ule na-rụrụ. Mgbe oku na-anyụ, imezi anya nke sample, kwekọrọ ekwekọ okpomọkụ radieshon agbanwe oge bara uru, ya bụ, oké egwu okpomọkụ radieshon agbanwe oge.
The FRP flooring Ụtọ Panel Test ngwa-emezu ihe ndị na-esonụ ule ụzọ:
ISO 9239-1：Floor coverings - Fire reaction test - Part 1: Determination of flaming performance using radiant heat sources;
ASTM E648：The floor covering is subjected to a critical thermal radiation test using a thermal radiation source method;
GB/T 11785：Determination of the burning properties of flooring materials - radiant heat source method.
Dimension:1900mm (W) x 750mm x (H) x 2120mm (D)
Arọ: 235kg
nwụnye chọrọ
Nwụnye size (mm)
Test igbe size :: 1800 (L) * 1500 (W) * 2400 (H)
Electric akara kabinet size: 600 (L) * 1000 (W) * 1800 (H)
nwụnye chọrọ
Ike ọkọnọ: 220 V±10%，50 Hz，5A
Air iyi chọrọ
Combustion gas: ọkọlọtọ propane, ọkọnọ eruba ọnụego bụ ihe na-erughị 5L / min, na gas uzo mmiri nrụgide bụ ihe na-erughị 0.15MPa;
Compressed air: the air force of the intake air is not less than 0.5MPa, and the flow rate is not less than 180L/min;
Water source: dedicated coolant for cooling the heat flow meter.
Ọdụdọ: 230 volts elu ọnụ 10 Amps
Ihere okpomọkụ: Ịwa 10 ° C na 35 ° C
Dimensions: Apparatus: 1900mm (W) x 750mm x (H) x 2120mm (D)
Gas ọnọde: propane ma ikuku Compressor
Iyuzucha usoro chọrọ
Iyuzucha anwụrụ: caliber 30cm, ifufe ọsọ 2.5m / s, elu si n'ala bụ 2.4m.
What is the ISO 9239-1:2010?
ISO 9239-1:2010 specifies a method for testing the upwind combustion behavior and flame spread of horizontally installed floors exposed to heat flux radiation gradients in a laboratory, when ignited with a pilot flame.
This method works for all types of floors. Examples include textile carpets, cork, wood, rubber and plastic coverings and coatings. The results obtained by this method reflect the performance of the floor, including any substrates (if used). Modifications to the backing, adhesion to the substrate, other changes to the underlayment or floor may affect the test results.
