China EN ISO 9239-1 Radiant Flooring Panel Test Apparatus Manufacturers and Suppliers | Skyline
industrial sewing machine

EN ISO 9239-1 Radiant Flooring Panel Test Apparatus

توضیح کوتاه:

The ISO 9239 Radiant Flooring Panel test is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. The test measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source.

 


  • Min.Order تعداد: 1 واحد
  • قیمت: قابل مذاکره
  • بسته بندی: تخته سه لا مورد
  • مدل: SL-FL05
  • استانداردها: EN ISO 9239-1، ASTM E648، ASTM E970، NFPA 253
  • مشخصات محصول

    محصولات برچسب ها

    Radiant Flooring Panel Test Apparatus Stainless Steel Hood with Smoke Measurement Ports

    Product parameters (specifications)of the the Radiant Flooring Panel Test Apparatus

     حداکثر قدرت عامل  5kw را
     دقت زمان بندی  <1S / ساعت
     حرارت شار متر محدوده اندازه گیری  (0-15) KW / m2 و. (جریان گرما مشتری متعلق به)

     

     حرارت دقت متر شار  ± 0.2Kw / m2 و
     حرارت دقت متر شار  <± 3٪؛
     حرارت وسیعی تابش اذر سنج  400-600 ℃، دقت ± 0.5 ℃؛

     

     خطا دمای بدن سیاه  ± 5 ℃؛
     سرعت دود  (0.2 ± 2.5) m / s و
     ظرفیت دود  (39-85) M3 / دقیقه
     متخلخل نسوز اندازه هیئت مدیره تابش  300mm × 450mm, the ability of about 900 ℃ high temperature;

     

     ترموکوپل  قطر ترموکوپل 3.2mm نوع K از جنس استنلس استیل زره پوش
     سوزاندن مشعل  قطر ¢ قطر 10mm و ¢ از 6mm، اسپری لوله در سوراخ 35 ¢ 0.7MM
     ارتفاع شعله  60 ~ 120mm سیستم قابل تنظیم
     سیستم احتراق  سیستم جرقه زنی الکترونیکی ولتاژ بالا
     سوزاندن اندازه جعبه  L1420 * W1200 * H2300 (میلی متر)
     سیستم اگزوز قوی  دستگاه با یک فن قوی، زمانی که تست کامل شده است مجهز شده است، شروع به سیستم اگزوز فن خواهد بود خارج از منزل خسته

    معرفی محصول از تابشی کف سازی پنل تست  دستگاه

    آزمون ISO 9239 تابشی کف سازی پنل سنگ بنای واکنش مواد کف پوش به آزمایش آتش در سیستم Euroclass است. آزمون اندازه گیری از گسترش شعله نمونه، تحت تابش حرارتی، با استفاده از یک منبع احتراق گرمای تابشی. قرار گرفتن در معرض حرارتی است که از یک آتش سوزی در حال رشد در اتاق از مبدا که از طریق باز کردن درب، تابش بر روی کف در اتاق مجاور و یا راهرو. دستگاه همچنین می تواند برای آزمایش استاندارد ASTM E648 و DIN 4102 استفاده می شود؛ قسمت 14.

    Use Environment

    داخل سالن استفاده
    ارتفاع: تا 2000M
    دمای محیط: 10 تا 35 درجه سانتی گراد (60 تا 85 درجه فارنهایت)
    رطوبت نسبی: 45٪ ~ 75٪.
    نوسانات ولتاژ مجاز: 10٪ ولتاژ نامی.
    امتیاز تغییر تنظیمات: II
    درجه آلودگی: 1

    ویژگی های محصول و استفاده از  Radiant Flooring Panel تست  دستگاه

    1.The را محفظه آزمون نتیجه با عایق کلسیم سیلیکات عایق است و با یک پنجره مشاهده مقاوم در برابر درجه حرارت ارائه شده است.
    2.The stainless steel sample support assembly is mounted on a sliding platform to allow safe and easy loading of the test sample.
    3.The radiant heat is applied by means of a gas-fuelled panel, inclined at 30º, and directed at a horizontally mounted floor covering system specimen.
    4.The radiant panel generates a radiant energy flux distribution ranging from a nominal maximum of 10.9 kW/m2 to a minimum of 1.1 kW/m2.
    5.Dummy calibration specimen with holder, calibrated heat flux meter and mounting.
    6.The distance burned until flame-out is reached and converted, by calibration, into an equivalent critical radiant flux, in kW/m2.
    7.Heat Flux Meter: Range : 0 ~ 50 kw/m2; Surface emissivity :ε=0.95± 0.05
    8.A smoke measuring system, according to DIN 50055, is mounted on a separate frame at the exhaust stack.
    9.Control Rack for convenience in use, allowing observation of the apparatus and controls during equipment set-up and calibration.
    10.Automatic ignition of the radiant panel and safety cut-out.
    11.Automatic moving T type ignition burner
    12.Stainless steel hood with smoke measurement ports.

    کاربرد: این دستگاه FRP کف تابشی تست پنل یک ابزار است که می توان برای تعیین تابش حرارتی معادل فرش استفاده می شود، مواد کف سازی، و مواد عایق بام که از پهلو در شعله پخش شده است.

    Product Details of the Radiant Flooring Panel تست  دستگاه

    تستر تابش حرارتی برای هموار مواد به حرارت اندازه گیری شار تابش انتقادی از زمین پوشش مواد استفاده می شود. شار تابشی حساس به حرارت حادثه در واحد سطح دارد. گرمای بیشتر حادثه، بالاتر مقدار حرارت مورد نیاز برای مواد، و با ثبات تر از مواد. کمتر احتمال دارد آن است به آتش گرفتن. در دستگاه تست، یک منبع تابش گرما و تی نوع مشعل نصب شده است، و دورتر نمونه از منبع تابش، پایین تر تابش گرما در سطح دریافت شار، نمونه توسط T-نوع مشتعل سوز و آزمون انجام شده است. زمانی که شعله خاموش است، فاصله آسیب از نمونه، مربوط به تابش گرما ارزش شار، این است که، شار تابش گرما حیاتی است.

    دستگاه FRP کف سازی تست تابشی پنل در دیدار روش های آزمون های زیر است:
    ISO 9239-1:Floor coverings - Fire reaction test - Part 1: Determination of flaming performance using radiant heat sources;
    ASTM E648:The floor covering is subjected to a critical thermal radiation test using a thermal radiation source method;
    GB/T 11785:Determination of the burning properties of flooring materials - radiant heat source method.
    Dimension:1900mm (W) x 750mm x (H) x 2120mm (D)

    وزن: 235kg

    مورد نیاز نصب و راه اندازی

    اندازه نصب و راه اندازی (میلی متر)

    اندازه جعبه تست :: 1800 (L) * 1500 (W) * 2400 (H)
    برق اندازه کابینه کنترل: 600 (L) * 1000 (W) * 1800 (H)

    مورد نیاز نصب و راه اندازی

    منبع تغذیه:  220 V±10%,50 Hz,5A

    مورد نیاز منبع هوایی

    احتراق گاز: پروپان استاندارد، نرخ جریان عرضه کمتر از 5L / دقیقه نیست، و فشار ورودی گاز از 0.15MPa نه کمتر.
    Compressed air: the air force of the intake air is not less than 0.5MPa, and the flow rate is not less than 180L/min;
    Water source: dedicated coolant for cooling the heat flow meter.

    برق: 230 ولت 10 آمپر اسمی
    دمای محیط: عامل 10 ° C تا 35 ° C
    Dimensions: Apparatus: 1900mm (W) x 750mm x (H) x 2120mm (D)
    گاز: پروپان و کمپرسور هوا

    سیستم مورد نیاز اگزوز

    لوله اگزوز: 30cm و کالیبر، سرعت باد 2.5M / S، ارتفاع از زمین 2.4M است.

    What is the ISO 9239-1:2010?

    ISO 9239-1:2010 specifies a method for testing the upwind combustion behavior and flame spread of horizontally installed floors exposed to heat flux radiation gradients in a laboratory, when ignited with a pilot flame.
    This method works for all types of floors. Examples include textile carpets, cork, wood, rubber and plastic coverings and coatings. The results obtained by this method reflect the performance of the floor, including any substrates (if used). Modifications to the backing, adhesion to the substrate, other changes to the underlayment or floor may affect the test results.











  • قبلی:
  • بعدی:

  • در اینجا پیام خود را بنویسید و ارسال آن به ما
    industrial sewing machine