EN ISO 9239-1 Radiant Flooring Panel Test Apparatus
Radiant Flooring Panel Test Apparatus Stainless Steel Hood with Smoke Measurement Ports
Product parameters (specifications)of the the Radiant Flooring Panel Test Apparatus
მაქსიმალური ძალა | 5 კვ |
Timing სიზუსტით | <1s / სთ |
სითბოს ნაკადად მეტრი საზომი დიაპაზონი | (0-15) კვტ / მ 2; (სითბოს ნაკადი მომხმარებელს საკუთრებაში არსებული) |
სითბოს ნაკადად მეტრის სიზუსტით | ± 0.2Kw / მ 2 |
სითბოს ნაკადად მეტრის სიზუსტით | <± 3%; |
სითბოს რადიაციული pyrometer სპექტრი | 400-600 ℃, სიზუსტე ± 0.5 ℃; |
შავი სხეულის ტემპერატურის შეცდომა | ± 5 ℃; |
მოწევა სიჩქარე | (2.5 ± 0.2) მ / წმ |
მოწევა მოცულობა | (39-85) მ 3 / წთ |
ფოროვანი ცეცხლგამძლე რადიაციული ფორუმში ზომა | 300mm × 450mm, the ability of about 900 ℃ high temperature; |
thermocouple | დიამეტრი 3.2mm K ტიპის ფოლადის დაჯავშნული thermocouple |
იწვის ლამპარი | დიამეტრი ¢ 10mm დიამეტრი ¢ 6mm, spray მილის 35 ¢ 0.7mm ხვრელი |
ფლეიმის სიმაღლე | 60 ~ 120 რეგულირება |
აალება სისტემის | მაღალი ძაბვის ელექტრონული ანთება |
Burning ყუთი ზომა | L1420 * W1200 * H2300 (mm) |
ძლიერი გამოსაბოლქვი სისტემა | მანქანა აღჭურვილია ძლიერი გულშემატკივართა, როდესაც ტესტი დასრულდა, დაიწყოს გამონაბოლქვი გულშემატკივართა სისტემა იქნება ამოწურა გარეთ |
პროდუქტის დანერგვა Radiant იატაკი Panel ტესტი აპარატი
ისო 9239 Radiant იატაკი Panel ტესტი ქვაკუთხედი იატაკი მასალები რეაქცია fire ტესტების ევროკლას სისტემა. ტესტი ზომავს გავრცელების ალი ნიმუში, ქვეშ თერმული ზემოქმედების გამოყენებით radiant სითბო ანთება წყარო. თერმული ზემოქმედების არის, რომ ცეცხლის იზრდება ოთახში წარმოშობის მეშვეობით კარი გახსნა, აცისკროვნებს გადატანა floorings მეზობელ ოთახში ან დერეფანში. აპარატი, ასევე შეიძლება გამოყენებული ტესტები სტანდარტების ASTM E648 და DIN 4102; Part 14.
Use Environment
შიდა გამოყენების
სიმაღლე: up to 2000 მ
გარემოს ტემპერატურა: 10 to 35 ° C (60 to 85 ° F)
ტენიანობა: 45% ~ 75%.
ნებადართული ძაბვის რყევების: 10% ძაბვაზე.
Overvoltage ნიშანი: II
დაბინძურების ხარისხი: 1
პროდუქტის მხატვრული და გამოყენების Radiant Flooring Panel ტესტი აპარატი
1. რის ტესტი პალატა იზოლირებულია კალციუმის სილიკატური საიზოლაციო ფორუმში და უზრუნველყოფილია ტემპერატურის გამძლე სადამკვირვებლო ფანჯარა.
2.The stainless steel sample support assembly is mounted on a sliding platform to allow safe and easy loading of the test sample.
3.The radiant heat is applied by means of a gas-fuelled panel, inclined at 30º, and directed at a horizontally mounted floor covering system specimen.
4.The radiant panel generates a radiant energy flux distribution ranging from a nominal maximum of 10.9 kW/m2 to a minimum of 1.1 kW/m2.
5.Dummy calibration specimen with holder, calibrated heat flux meter and mounting.
6.The distance burned until flame-out is reached and converted, by calibration, into an equivalent critical radiant flux, in kW/m2.
7.Heat Flux Meter: Range : 0 ~ 50 kw/m2; Surface emissivity :ε=0.95± 0.05
8.A smoke measuring system, according to DIN 50055, is mounted on a separate frame at the exhaust stack.
9.Control Rack for convenience in use, allowing observation of the apparatus and controls during equipment set-up and calibration.
10.Automatic ignition of the radiant panel and safety cut-out.
11.Automatic moving T type ignition burner
12.Stainless steel hood with smoke measurement ports.
განაცხადის: FRP იატაკი Radiant Panel ტესტი აპარატი არის ინსტრუმენტი, რომელიც შეიძლება იქნას გამოყენებული, რათა დადგინდეს ექვივალენტი თერმული რადიაციის ხალიჩების, იატაკი მასალები, და გადახურვის საიზოლაციო მასალები, რომლებიც laterally გავრცელებული ალი.
Product Details of the Radiant Flooring Panel ტესტი აპარატი
თერმული გამოსხივების ტესტერი მოსაპირკეთებელი მასალები მიმართა კრიტიკული თერმული გამოსხივების ნაკადის გაზომვა ადგილზე დაფარვის მასალა. კრიტიკული radiant ნაკადად საუბარია ინციდენტზე სითბო ერთეულის ტერიტორიაზე. უფრო მეტი ინციდენტი სითბო, უმაღლესი გათბობის თანხა საჭირო მასალა, და უფრო სტაბილური მასალა. ნაკლებად სავარაუდოა, რომ ეს არის დაიჭიროთ ცეცხლი. ტესტი მოწყობილობა, სითბოს რადიაციული წყარო და T-type burner დამონტაჟებული და შემდგომი მოშორებით ნიმუში არის რადიაციის წყარო, ქვედა სითბოს რადიაციული ნაკადად მიიღო ზედაპირზე, ნიმუში გაუჩნდა მიერ T-type burner, და გამოკვლევა. როდესაც ალი ლიკვიდირებულია, დაზიანება მანძილზე ნიმუში, შესაბამისი სითბოს რადიაციული ნაკადად მნიშვნელობა, რომ არის, კრიტიკული სითბოს რადიაციული ნაკადად.
FRP იატაკი Radiant Panel ტესტი აპარატი აკმაყოფილებს შემდეგ ტესტირების მეთოდები:
ISO 9239-1:Floor coverings - Fire reaction test - Part 1: Determination of flaming performance using radiant heat sources;
ASTM E648:The floor covering is subjected to a critical thermal radiation test using a thermal radiation source method;
GB/T 11785:Determination of the burning properties of flooring materials - radiant heat source method.
Dimension:1900mm (W) x 750mm x (H) x 2120mm (D)
წონა: 235kg
სამონტაჟო მოთხოვნები
სამონტაჟო ზომა (მმ)
ტესტი ყუთი ზომა :: 1800 (L) * 1500 (W) * 2400 (H)
ელექტრო კონტროლის კაბინეტი ზომა: 600 (L) * 1000 (W) * 1800 (H)
სამონტაჟო მოთხოვნები
ელექტრომომარაგება: 220 V±10%,50 Hz,5A
საჰაერო წყარო მოთხოვნები
წვის გაზი: სტანდარტული პროპან, მიწოდება დანახარჯი არის არანაკლებ 5L / წთ და გაზის შემშვები ზეწოლა არ არის ნაკლები 0.15MPa;
Compressed air: the air force of the intake air is not less than 0.5MPa, and the flow rate is not less than 180L/min;
Water source: dedicated coolant for cooling the heat flow meter.
ელექტრო: 230 ვოლტი ნომინალური 10 Amps
გარემოს ტემპერატურა: ოპერაციული 10 ° C 35 ° C
Dimensions: Apparatus: 1900mm (W) x 750mm x (H) x 2120mm (D)
გაზის მიწოდება: პროპანი და ჰაერის კომპრესორი
გამოსაბოლქვი სისტემა მოთხოვნები
გამოსაბოლქვი მილი: კალიბრის 30cm, ქარის სიჩქარე 2.5 / s, სიმაღლე მიწიდან არის 2.4m.
What is the ISO 9239-1:2010?
ISO 9239-1:2010 specifies a method for testing the upwind combustion behavior and flame spread of horizontally installed floors exposed to heat flux radiation gradients in a laboratory, when ignited with a pilot flame.
This method works for all types of floors. Examples include textile carpets, cork, wood, rubber and plastic coverings and coatings. The results obtained by this method reflect the performance of the floor, including any substrates (if used). Modifications to the backing, adhesion to the substrate, other changes to the underlayment or floor may affect the test results.