China SL-FL67 Wire and Cable Heat Release Test Device Manufacturers and Suppliers | Skyline
industrial sewing machine

SL-FL67 Wire and Cable Heat Release Test Device

Mallonga priskribo:

EN 50399 specifies the apparatus and methods of test for the assessment of vertical flame spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions.


  • Min.Order Kvanto: 1 unuo
  • Prezo: negociable
  • Paki: Plywood Kazo
  • Model: SL-FL67
  • normoj: DIN EN 50399:2017,EN 50399
  • produkto Detalo

    produkto Etikedoj

    DIN EN 50399:2017 Wire and Cable Heat Release Test Device with Stainless Steel Two-Way Speed Probe

    Produkta enkonduko de la  Drato kaj kablo Varmeco Release Testa Aparato

    EN 50399 specifas la aparato kaj metodoj de provo por la taksado de vertikala flamo disvastiĝo, varmego eldono kaj fumo produktado de vertikale-muntita amasis dratojn aŭ kabloj, elektraj aŭ optika, sub difinitaj kondiĉoj. EN 50399 detalla la aparato kaj la aranĝo kaj calibración de la instrumentación por esti instalita por mezuri la varmego ĵeto kaj la fumo produktado dum la incendio testo. Testa proceduroj por esti uzita por tipo aprobo testado por klasifiko de kabloj en Euroclasses B1ca, B2ca, CCA kaj DCA estas donitaj.

    Produkta parametroj de la  Drato kaj kablo Varmeco Release Testa Aparato

    1. Test chamber has the dimension of 1,000±100(W) x 2,000±100(D) x 4,000±100(H) mm. The bottom surface of the test chamber is higher than the ground while the rear side is supplemented with insulated material to insulate it from heat.
    2. At the lower section of the test chamber, there is a 800±20(W) x 400±10(D) sized hole at the 150±10mm position from the front side of the chamber to supply the air.
    3. There is a 300±30(W)x1,000±100(D) sized exhaust hole at the rear corner of the top section of the test chamber to allow emission of the smoke during the test.
    4. A flame trap is installed at the front side of the burner of the vertical flame spread tester to prevent backfire by propane to ensure the utmost safety.
    5. Unlike the conventional IEC60332-3 equipment, the vertical flame spread tester records all control and test conditions with the computer to add user friendliness.
    6. If stop the excessive combustion test due to Water Spray device installed for extinguish.
    7. The program on the requirement on standard and 70,000Btu/h can be program.
    8. Wide stainless steel ladder dimensions: 500(W) ×3, 500(H) mm.
    9. Standard stainless steel ladder dimensions: 800(W) ×3, 500(H).
    10. Two sets of standard propane burner and venturi mixtures.
    11. Follow the standard category can program for select a test.
    12. Exhaust system consists of smoke collection hood,exhaust duct, air inlet system, Centrifugal fan and frequency converter.
    13. The duct section houses all gas sampling probes, temperature and mass flow probes and has ports for the smoke measuring system.
    14. Paramagnetic oxygen analyzer, using the method of paramagnetic change to measure the concentration of oxygen in the gas. Concentration range of 0-25%.
    15. Carbon Dioxide Analyser (infrared) for use in heat release measurement. Concentration range of 0-10%.
    16. Soot filter, cold trap, drying column, pump and waste regulators for conditioning the sample gases prior to analysis.
    17. Dataacquisition system and software.

    Produkta Karakterizaĵo kaj Apliko de la  Drato kaj kablo Varmeco Release Testa Aparato

    1. Norma 19 kabineto unuo, inkluzive paramagnética Aŭ2, ne-dispersivo transruĝa CO2 gaso analizilo;
    2. Tajvano Advantech datumoj akiraĵo tabulon 1 aro, povas kolekti temperaturo, gaso premo diferenco kaj gaso analizilo datumoj, ktp .;
    3. Neoksidebla ŝtalo dudirekta rapido sondas, kun aro de vento premo malkaŝo aparatoj kiel ekzemple mikro diferencialaj premo sensor;
    4. Usono OMEGA K-tipo termopar 3, detekti la flue gaso temperaturo 1 aro;
    5. Ekipita kun aro de gaso kolekto sondas aparato, konektitaj de PTFE tubo, povas kolekti koroda gaso;
    6. Dehumidifying malvarma kaptilo, gaso konstanta fluo kaj tensio regulador, 1 aro de usonaj CAST gaso kolekto pumpilo aparato, ekipita kun neoksidebla ŝtalo pipon kaj PTFE hoso ligo;
    7. An incandescent lamp smoke density measuring system comprising an incandescent light source and a silicon photodiode receiving device;
    8. Dotita 5 neŭtrala filtriloj, optika denseco gamo de 0.1-2;
    9 4 importitaj maso trafluo aparatoj, ekipita per premo redukti valvoj, solenoide valvoj, ktp .;
    10. Norma testo programaro, inkluzive de calibración proceduroj, kaj povas esti uzata por monomero brulanta testo;
    11. Ekipita kun 1 aro de komputilo kaj presilo aparatoj;
    12 Testa ekipaĵo kiel ekzemple tubo de ellasilo kaj centrifuga ventumilo;
    13. Du propano maso fluo regiloj;
    14. Du aero maso fluo regiloj;
    15 22.5KW kaj 30KW flamo calibración eblas realigitaj de maso trafluo agante sur ununura brulilo;
    16. Bundle drato kaj kablo brulanta teston aparato.

    Apliko: La testo sistemo estas mez-skala incendio testo simulante ekestos kablo aŭ kablo de optika fibro. La testo kablo estas instalita sur vertikala normo ŝtalo ŝtupetaro kaj ŝaltitaj de specifa sparkado fonto por taksi la brulado konduto kaj bruligado elfaro de la kablo. Bruligado agado datumoj por la fruaj stadioj de kablo fajro,

    La testo de la varmego eldono indico reflektas la danĝero de la flamo disvastigo laŭ la kablo kaj la potenciala efiko de la fajro fonto sur la apuda areo. La fumo denseca testo spektakloj la videblecon de la fajro areon kaj la danĝero de la fumo por la persona sekureco.

    Plej Informoj de la Drato kaj kablo Varmeco Release Testa Aparato

    EN 50399 Testa aparato estas konsistas el IEC 60332-3 aparato, varmego eldono mezurado, fumo denseco mezurado kaj modifita aero eniro sistemo. Ĉi tio sukcesas persvadi malgranda instrumented sekcio de ducting en la sistemo de ellasilo de la platformo kaj uzi tiun kun asociitaj gaso analizo instrumentación kaj programaro. La tubo sekcio domoj ĉiu gaso muestreo sondas, temperaturo kaj maso fluo enketojn kaj ĝi havas havenojn por la fumo mezura sistemo.
    La testo povas akiri la sekvajn karakterizaĵojn de la kablo aŭ kablo sub certaj brulado kondiĉoj:
    Flamo disvastiĝis Flamo Spread FS
    Varmeco Release Imposto Varmeco Release Imposto HRR
    Tuta varmego eldono Tuta Varmeco Release THR
    Fumo produktado indico Fumo Produktado Imposto SPR
    Tuta fumo produktado Tuta Smoke Produktado TSP
    brulanta Kresko Imposto Indekso Fajro Kresko Imposto FIGRA

    normoj

    Din: DIN EN 50399: 2017; EN : EN 50399; GB/T 31248: 2014

    dimensio

    1120 mm (W) x 2200 mm (D) x 5600 mm (H)

    pezo

    1200kg

    Elektraj

    110V AC 60Hz / 230V AC 50Hz, 5A

    ambient Temperaturo

    Operaciante 10 ° C al 35 ° C

    Gas

    air and propane


  • Antaŭa:
  • Sekva:

  • Skribu vian mesaĝon ĉi tie kaj sendi ĝin al ni
    industrial sewing machine