煙濃度室
Smoke Density Chamber Electronic ignition system with PID temperature controller Analysis of various gases
製品プロファイル of 煙濃度室
この器具は、密閉チャンバー内の垂直位置に取り付けられ、長年にわたって確立されていると固体材料とのアセンブリによって生成された煙の決意のためのすべての産業分野で広く使用されています。
製品 パラメータ の 煙濃度室
サイズ | 1560 mm (W) x 2220 mm x (H) x 1060 mm |
重量 | 190KG |
規格 | AITM 2.0007A,AITM 2.0007B,AITM 3.0005、BSS 7238,BSS 7239、FAR PART 25 APPENDIX F Part V |
応用 | Aviation |
電気 | 110V AC 60Hz / 230V AC 50Hz, 15A |
周囲温度 | Operating 10°C to 35°C |
Product Feature の 煙濃度室
Powder coated liner removable for repair/replacement. Powder coated exterior.
Large tempered double glazed door for easy viewing and cleaning.
PID temperature controller for constant furnace setting.
Coil type tubular radiant heater with integrated thermocouple. Master electrical shut-off switch with maintenance lockout. Pneumatic actuated test sample transport system for repeatability of tests.
Electronic ignition system.
Calibrated flowmeters Propane and air flow measurement. Master gas on/off control with safety latching circuit to prevent gas flow following power interruption.
2 removable 6 flame pilot burners for normal test and wire test. 4 ports on roof of chamber for toxicity analysis.
3 stainless steel sample holders complete with backer board, spring and spring pin.
1 blank sample for wall protection. Wire sample holder
Calibration system including 1 water cooled heat flux gauge (0-5 W/cm2), holder and integral cooling system.
3 optical filters for linearity calibration.
Furnace location and pilot burner location tools. Pilot burner cleaning tool.
Customized data acquisition software and hardware for calibration and testing with USB interface for connection to external computer (administration rights required for computer)
Data stored in csv format for easy exporting to spreadsheet programs.
Spare parts kit including
炉光電子増倍管ランプ
バーナー標準パイロット
ドアシール
ベントシールが
アクチュエータベント
排気ファン
ガス/空気ソレノイド
ヒューズキットの
コンピュータシステムが含まれるがrequeste場合に供給することができません