Khói Mật độ Phòng
Smoke Density Chamber Electronic ignition system with PID temperature controller Analysis of various gases
Sản phẩm Hồ sơ of Khói Mật độ Phòng
Thiết bị này đã được thành lập trong nhiều năm và được sử dụng rộng rãi trong tất cả các ngành công nghiệp để xác định khói tạo ra bởi vật liệu rắn và lắp ráp gắn ở vị trí thẳng đứng trong một buồng kín.
Sản phẩm thông số của Khói Mật độ Phòng
Kích thước | 1560 mm (W) x 2220 mm x (H) x 1060 mm |
Cân nặng | 190KG |
Tiêu chuẩn | AITM 2.0007A,AITM 2.0007B,AITM 3.0005、BSS 7238,BSS 7239、FAR PART 25 APPENDIX F Part V |
Ứng dụng | Aviation |
điện | 110V AC 60Hz / 230V AC 50Hz, 15A |
nhiệt độ môi trường xung quanh | Operating 10°C to 35°C |
Product Feature của Khói Mật độ Phòng
Powder coated liner removable for repair/replacement. Powder coated exterior.
Large tempered double glazed door for easy viewing and cleaning.
PID temperature controller for constant furnace setting.
Coil type tubular radiant heater with integrated thermocouple. Master electrical shut-off switch with maintenance lockout. Pneumatic actuated test sample transport system for repeatability of tests.
Electronic ignition system.
Calibrated flowmeters Propane and air flow measurement. Master gas on/off control with safety latching circuit to prevent gas flow following power interruption.
2 removable 6 flame pilot burners for normal test and wire test. 4 ports on roof of chamber for toxicity analysis.
3 stainless steel sample holders complete with backer board, spring and spring pin.
1 blank sample for wall protection. Wire sample holder
Calibration system including 1 water cooled heat flux gauge (0-5 W/cm2), holder and integral cooling system.
3 optical filters for linearity calibration.
Furnace location and pilot burner location tools. Pilot burner cleaning tool.
Customized data acquisition software and hardware for calibration and testing with USB interface for connection to external computer (administration rights required for computer)
Data stored in csv format for easy exporting to spreadsheet programs.
phụ tùng Kit bao gồm
Lò quang ống đèn
thí điểm tiêu chuẩn burner
Door dấu
niêm phong Vent
Vent thiết bị truyền động
quạt gió
khí / không khí Solenoid
Fuse bộ
hệ thống máy tính không bao gồm nhưng có thể được cung cấp nếu requeste