EN ISO 9239-1 Radiant Flooring Panel Test Apparatus
Radiant Flooring Panel Test Apparatus Stainless Steel Hood with Smoke Measurement Ports
Product parameters (specifications)of the the Radiant Flooring Panel Test Apparatus
Maximum operating hwj chim | 5kw |
sij hawm poob raug | <1s / h |
Thaum tshav kub kub hloov mus hloos los 'meter' Xab ntau | (0-15) Kw / m2; (Thaum tshav kub kub khiav qhua tuaj noj mov-muaj) |
Thaum tshav kub kub flux 'meter' cov neeg | ± 0.2Kw / m2 |
Thaum tshav kub kub flux 'meter' cov neeg | <± 3%; |
Thaum tshav kub kub tawg pyrometer ntau | 400-600 ℃, qhov tseeb ntawm ± 0.5 ℃; |
Dub lub cev kub kev ua yuam kev | ± 5 ℃; |
Haus luam yeeb ceev | (2.5 ± 0.2) m / s |
Haus luam yeeb muaj peev xwm | (39-85) m3 / min |
Ntxeem tau refractory tawg board loj | 300mm × 450mm, the ability of about 900 ℃ high temperature; |
Thermocouple | txoj kab uas hla ntawm 3.2mm K-hom stainless steel armored thermocouple |
Hlawv teeb | txoj kab uas hla 10 hli ¢ txoj kab uas hla ¢ 6mm, tsuag raj rau lub 35 ¢ 0.7mm qhov |
Nplaim siab | 60 ~ hli 120 adjustable |
ignition system | high voltage hluav taws xob tiv cav tseb |
Hlawv lub thawv loj | L1420 * W1200 * H2300 (hli) |
Muaj zog tso system | lub tshuab yog txawm peem rau nrog ib tug muaj zog kiv cua, thaum lub xeem raug ua tiav, pib lub qaiv cua system yuav sab sab nraum zoov |
Khoom cov kev taw qhia ntawm cov Radiant Flooring Vaj Huam Sib Luag Test Apparatus
Cov ISO 9239 Radiant Flooring Vaj Huam Sib Luag kev kuaj ntawd yog lub hauv paus ntawm lub flooring ntaub ntawv tshuaj tiv thaiv rau hluav taws kub kev ntsuam xyuas nyob rau hauv lub Euroclass system. Lub xeem no yog xeem kis ntawm nplaim ntawm tus qauv, nyob rau hauv thermal raug, siv ib tug radiant tshav kub tiv cav tseb qhov chaw. Lub thermal raug yog hais tias muaj hluav taws kub loj hlob nyob rau hauv lub chav tsev ntawm keeb kwm hais tias los ntawm ib lub qhov rooj qhib, radiates mus rau lub floorings nyob rau hauv ib tug nyob ib sab chav tsev los yog hauv tsev. Lub apparatus kuj yuav siv tau rau kev ntsuam xyuas rau cov qauv ASTM E648 thiab DIN 4102; Part 14.
Use Environment
Nyob sab hauv tsev siv
Altitude: mus txog 2000m
Ambient kub: 10 mus rau 35 ° C (60 mus rau 85 ° F)
Tus kwv tij av noo: 45% ~ 75%.
Tso voltage hloov mus hloov los: 10% ntawm cov movies voltage.
Overvoltage ntsuam xyuas: II
Pollution degree: 1
Khoom Feature thiab daim ntawv thov ntawm cov Radiant Flooring Panel Test Apparatus
1. ua xeem chamber yog insulated nrog calcium silicate rwb thaiv tsev board thiab yog muab nrog ib tug kub resistant soj qhov rais.
2.The stainless steel sample support assembly is mounted on a sliding platform to allow safe and easy loading of the test sample.
3.The radiant heat is applied by means of a gas-fuelled panel, inclined at 30º, and directed at a horizontally mounted floor covering system specimen.
4.The radiant panel generates a radiant energy flux distribution ranging from a nominal maximum of 10.9 kW/m2 to a minimum of 1.1 kW/m2.
5.Dummy calibration specimen with holder, calibrated heat flux meter and mounting.
6.The distance burned until flame-out is reached and converted, by calibration, into an equivalent critical radiant flux, in kW/m2.
7.Heat Flux Meter: Range : 0 ~ 50 kw/m2; Surface emissivity :ε=0.95± 0.05
8.A smoke measuring system, according to DIN 50055, is mounted on a separate frame at the exhaust stack.
9.Control Rack for convenience in use, allowing observation of the apparatus and controls during equipment set-up and calibration.
10.Automatic ignition of the radiant panel and safety cut-out.
11.Automatic moving T type ignition burner
12.Stainless steel hood with smoke measurement ports.
Daim ntawv: Lub FRP Flooring Radiant Vaj Huam Sib Luag Test Apparatus yog ib qho kev ntsuas uas yuav tau siv los mus txiav txim qhov sib npaug thermal tawg ntawm pua, flooring cov ntaub ntawv, thiab vov tsev rwb thaiv tsev ntaub ntawv uas laterally kis nyob rau hauv cov nplaim taws.
Product Details of the Radiant Flooring Panel Test Apparatus
Lub thermal tawg tester rau paving ntaub ntawv yog thov mus rau ib qho tseem ceeb thermal tawg flux ntsuas ntawm lub hauv av yuav tsum vov ntaub ntawv. Cov tseem ceeb heev radiant flux hais txog qhov teeb meem kub ib chav tsev cheeb tsam. Qhov ntau dua qhov teeb meem kub, ntau dua qhov lub cua sov npaum li cas yuav tsum tau rau cov khoom, thiab cov paub ntau tshaj ruaj cov khoom. Cov tsawg dua nws yog mus caum tua hluav taws. Nyob rau hauv lub xeem ntaus ntawv, lub tshav kub tawg qhov twg los thiab ib tug T-hom burner yog ntsia, thiab cov deb cov qauv no yog los ntawm cov tawg qhov twg los, txo cov cua sov tawg flux tau txais rau ntawm qhov chaw, cov qauv yog cig los ntawm lub T-hom burner, thiab cov kev xeem yog ua. Thaum cov nplaim taws yog extinguished, cov kev puas tsuaj deb ntawm tus qauv, lub sib nug xov tshav kub tawg flux nqi, uas yog, qhov tseem ceeb heev thaum tshav kub kub tawg flux.
Lub FRP Flooring Radiant Vaj Huam Sib Luag Test Apparatus raws li nram qab no kuaj txoj kev:
ISO 9239-1:Floor coverings - Fire reaction test - Part 1: Determination of flaming performance using radiant heat sources;
ASTM E648:The floor covering is subjected to a critical thermal radiation test using a thermal radiation source method;
GB/T 11785:Determination of the burning properties of flooring materials - radiant heat source method.
Dimension:1900mm (W) x 750mm x (H) x 2120mm (D)
Nyhav: 235kg
installation uas yuav tsum tau
Installation loj (hli)
Test box loj :: 1800 (L) * 1500 (W) * 2400 (H)
Electric tswj txee loj: 600 (L) * 1000 (W) * 1800 (H)
installation uas yuav tsum tau
Fais fab mov: 220 V±10%,50 Hz,5A
Cua qhov chaw uas yuav tsum tau
Combustion roj: standard hluav taws roj zeb, cov mov txaus tus nqi yog tsis tsawg tshaj li 5L / min, thiab cov roj inlet siab yog tsis tsawg tshaj li 0.15MPa;
Compressed air: the air force of the intake air is not less than 0.5MPa, and the flow rate is not less than 180L/min;
Water source: dedicated coolant for cooling the heat flow meter.
Hluav taws xob cov: 230 volts nominal 10 Amps
Ambient kub: Operating 10 ° C rau 35 ° C
Dimensions: Apparatus: 1900mm (W) x 750mm x (H) x 2120mm (D)
Gas Khoom siv: Hluav taws roj zeb thiab huab cua compressor
Tso system uas yuav tsum tau
Tso yeeb nkab: caliber 30cm, cua ceev 2.5m / s, siab los ntawm qhov av yog 2.4m.
What is the ISO 9239-1:2010?
ISO 9239-1:2010 specifies a method for testing the upwind combustion behavior and flame spread of horizontally installed floors exposed to heat flux radiation gradients in a laboratory, when ignited with a pilot flame.
This method works for all types of floors. Examples include textile carpets, cork, wood, rubber and plastic coverings and coatings. The results obtained by this method reflect the performance of the floor, including any substrates (if used). Modifications to the backing, adhesion to the substrate, other changes to the underlayment or floor may affect the test results.