compression Head
ASTM F 963 8.10.1 Compression tête pour l' équipement d' essai Jouets de diamètre 30 mm Round Rod
Présentation du produit de la tête de compression
To simulate the subjecting of a toy to mechanical damage through compressing or other action likely to be performed by a child. After testing, the toy may be tested for sharp edges, sharp points & small parts.
Paramètres du produit de la compression Head
Diamètre | 30 mm de tige ronde |
Dimension | 28 × 28 × 19 mm |
Normes | EN71-1998 8,8, ASTM F 963 8.10.1 |
Caractéristique du produit et l' application de la tête de compression
Test Methods:
The sample must be placed in an environment with a room temperature of 23 ± 2 ° C and a humidity of 20% to 70% for 4 hours before the pressure test;
The pressure head was placed in parallel on the test surface and pressed up to the desired number of pounds for 5 seconds for 10 seconds. (The toy should be placed on a flat, hard surface in any suitable position during the test).
Détails du produit de la tête de compression
Requirements and judgments:
1. Requirements:
a. American Standard (ASTM/CPSC) 0 to 18 months 20±0.5LBS 18 to 36 months 25±0.5LBS 36 to 96 months 30±0.5LBS
b. European standard: 110N ± 5 N
c. Chinese standard: 36N ± 2.0 N for 36 months - 37 months - 96 months 136 ± 2.0 N
d. Customer standard: refer to customer standard
2. If there are sharp edges, sharp points and small objects after the test, it will be regarded as unqualified.