ચાઇના કમ્પ્રેશન હેડ ઉત્પાદકો અને સપ્લાયર્સ | સ્કાયલાઇન
industrial sewing machine

કમ્પ્રેશન હેડ

લઘુ વર્ણન:

કરવા કોમ્પ્રેસ અથવા અન્ય ક્રિયા ભાગે બાળક દ્વારા કરવામાં આવે મારફતે યાંત્રિક નુકસાન રમકડા ની આધીન અનુકરણ થાય છે. પરીક્ષણ પછી, રમકડું તીક્ષ્ણ ધાર તીક્ષ્ણ પોઇન્ટ અને નાના ભાગો માટે પરીક્ષણ કરી શકે છે.


  • Min.Order જથ્થો: 1 એકમ
  • કિંમત: વાટાઘાટ
  • પેકેજ: પ્લાયવુડ કેસ
  • મોડેલ: SL-S07
  • ધોરણો: ASTM F 963 8.10.1,EN71-1998 8.8
  • ઉત્પાદન વિગતવાર

    ઉત્પાદન ટૅગ્સ

    એએસટીએમ એફ વ્યાસ 30 એમએમ રાઉન્ડ રોડ સાથે રમકડાં પરીક્ષણ સાધનો માટે 963 8.10.1 કમ્પ્રેશન હેડ

    સંકોચન હેડ ઉત્પાદન રજૂઆત
    To simulate the subjecting of a toy to mechanical damage through compressing or other action likely to be performed by a child. After testing, the toy may be tested for sharp edges, sharp points & small parts.

    કમ્પ્રેશન હેડ ઉત્પાદન પરિમાણો

     વ્યાસ   30 મીમી રાઉન્ડ લાકડી
     ડાયમેન્શન  28 × 28 × 19mm
     ધોરણો  EN71-1998 8.8, એએસટીએમ એફ 963 8.10.1

    ઉત્પાદન લક્ષણ અને સંકોચન હેડ અરજી
    Test Methods:
    The sample must be placed in an environment with a room temperature of 23 ± 2 ° C and a humidity of 20% to 70% for 4 hours before the pressure test;
    The pressure head was placed in parallel on the test surface and pressed up to the desired number of pounds for 5 seconds for 10 seconds. (The toy should be placed on a flat, hard surface in any suitable position during the test).

    કમ્પ્રેશન હેડ ઉત્પાદન વિગતો
    Requirements and judgments:
    1. Requirements:
    a. American Standard (ASTM/CPSC) 0 to 18 months 20±0.5LBS 18 to 36 months 25±0.5LBS 36 to 96 months 30±0.5LBS
    b. European standard: 110N ± 5 N
    c. Chinese standard: 36N ± 2.0 N for 36 months - 37 months - 96 months 136 ± 2.0 N
    d. Customer standard: refer to customer standard
    2. If there are sharp edges, sharp points and small objects after the test, it will be regarded as unqualified.


  • ગત:
  • આગામી:

  • તમારો સંદેશ અહીં લખો અને અમને મોકલી
    industrial sewing machine