ប្រមុខការបង្ហាប់
ASTM ស្រី 963 8.10.1 បង្ហាប់ប្រធានសម្រាប់ក្មេងលេងជាមួយអង្កត់ផ្ចិតការធ្វើតេស្តសម្ភារៈមមជុំទី 30 ជួយណែនាំ
សេចក្តីណែនាំផលិតផលនៃការបង្ហាប់នាយក
To simulate the subjecting of a toy to mechanical damage through compressing or other action likely to be performed by a child. After testing, the toy may be tested for sharp edges, sharp points & small parts.
ប៉ារ៉ាម៉ែត្រផលិតផលនៃការបង្ហាប់កណ្តាល
អង្កត់ផ្ចិត | 30 មមដំបងជុំ |
វិមាត្រ | 28 × 28 × 19mm |
ស្តង់ដា | EN71-1998 8.8, ASTM ស្រី 963 8.10.1 |
លក្ខណៈពិសេសផលិតផលនិងកម្មវិធីនៃការបង្ហាប់នាយក
Test Methods:
The sample must be placed in an environment with a room temperature of 23 ± 2 ° C and a humidity of 20% to 70% for 4 hours before the pressure test;
The pressure head was placed in parallel on the test surface and pressed up to the desired number of pounds for 5 seconds for 10 seconds. (The toy should be placed on a flat, hard surface in any suitable position during the test).
សេចក្ដីលម្អិតនៃការបង្ហាប់ផលិតផលនាយក
Requirements and judgments:
1. Requirements:
a. American Standard (ASTM/CPSC) 0 to 18 months 20±0.5LBS 18 to 36 months 25±0.5LBS 36 to 96 months 30±0.5LBS
b. European standard: 110N ± 5 N
c. Chinese standard: 36N ± 2.0 N for 36 months - 37 months - 96 months 136 ± 2.0 N
d. Customer standard: refer to customer standard
2. If there are sharp edges, sharp points and small objects after the test, it will be regarded as unqualified.