Cabeza de compresión
ASTM F 963 8.10.1 cabeza de compresión para probar equipamiento de juguetes con diámetro de 30 mm Varilla redonda
introducción del producto de la compresión de la cabeza
To simulate the subjecting of a toy to mechanical damage through compressing or other action likely to be performed by a child. After testing, the toy may be tested for sharp edges, sharp points & small parts.
Parámetros del producto de la cabeza de compresión
Diámetro | 30 mm barra redonda |
Dimensión | 28 × 28 × 19 mm |
normas | EN71-1998 8,8, ASTM F 963 8.10.1 |
Característica de producto y aplicación del cabezal de compresión
Test Methods:
The sample must be placed in an environment with a room temperature of 23 ± 2 ° C and a humidity of 20% to 70% for 4 hours before the pressure test;
The pressure head was placed in parallel on the test surface and pressed up to the desired number of pounds for 5 seconds for 10 seconds. (The toy should be placed on a flat, hard surface in any suitable position during the test).
Detalles del producto de la cabeza de compresión
Requirements and judgments:
1. Requirements:
a. American Standard (ASTM/CPSC) 0 to 18 months 20±0.5LBS 18 to 36 months 25±0.5LBS 36 to 96 months 30±0.5LBS
b. European standard: 110N ± 5 N
c. Chinese standard: 36N ± 2.0 N for 36 months - 37 months - 96 months 136 ± 2.0 N
d. Customer standard: refer to customer standard
2. If there are sharp edges, sharp points and small objects after the test, it will be regarded as unqualified.