ASTM F 963 8.10.1 Compression Kopf für Spielzeug Prüfmaschinen mit Durchmesser 30 mm Rund Rod

Produkteinführung des Kompressionskopf
To simulate the subjecting of a toy to mechanical damage through compressing or other action likely to be performed by a child. After testing, the toy may be tested for sharp edges, sharp points & small parts.

Produktparameter des Druckkopfes

Produkteigenschaft und die Anwendung des Kompressionskopf
Test Methods:
The sample must be placed in an environment with a room temperature of 23 ± 2 ° C and a humidity of 20% to 70% for 4 hours before the pressure test;
The pressure head was placed in parallel on the test surface and pressed up to the desired number of pounds for 5 seconds for 10 seconds. (The toy should be placed on a flat, hard surface in any suitable position during the test).

Produktdetails der Druckkopf
Requirements and judgments:
1. Requirements:
a. American Standard (ASTM/CPSC) 0 to 18 months 20±0.5LBS 18 to 36 months 25±0.5LBS 36 to 96 months 30±0.5LBS
b. European standard: 110N ± 5 N
c. Chinese standard: 36N ± 2.0 N for 36 months - 37 months - 96 months 136 ± 2.0 N
d. Customer standard: refer to customer standard
2. If there are sharp edges, sharp points and small objects after the test, it will be regarded as unqualified.