China mkpakọ Head Manufacturers na Suppliers | skyline
industrial sewing machine

mkpakọ Head

Short Description:

Iji simulate ndị na-edo nke a ji egwuri egwu na n'ibu mmebi site compressing ma ọ bụ ndị ọzọ edinam yiri ka a ga-rụrụ site a nwa. Mgbe ule, e ji egwuri egwu nwere ike anwale nkọ n'ọnụ, nkọ ihe & obere akụkụ.


  • Min.Order ibu: 1 unit
  • Ahịa: Okwukwe
  • Ngwugwu: Plywood Case
  • Model: SL-S07
  • Standards: ASTM F 963 8.10.1,EN71-1998 8.8
  • Product Ihe

    Product Tags

    ASTM F 963 8.10.1 mkpakọ Head maka Ụmụaka Testing Equipment na dayameta 30 mm Now Rod

    Product iwebata nke mkpakọ Head
    To simulate the subjecting of a toy to mechanical damage through compressing or other action likely to be performed by a child. After testing, the toy may be tested for sharp edges, sharp points & small parts.

    Product afọ nke mkpakọ Head

     dayameta   30 mm gburugburu mkpanaka
     Dimension  28 × 28 × 19mm
     Standards  EN71-1998 8.8, ASTM F 963 8.10.1

    Product Njirimara na Ngwa nke mkpakọ Head
    Test Methods:
    The sample must be placed in an environment with a room temperature of 23 ± 2 ° C and a humidity of 20% to 70% for 4 hours before the pressure test;
    The pressure head was placed in parallel on the test surface and pressed up to the desired number of pounds for 5 seconds for 10 seconds. (The toy should be placed on a flat, hard surface in any suitable position during the test).

    Product Nkọwa nke mkpakọ Head
    Requirements and judgments:
    1. Requirements:
    a. American Standard (ASTM/CPSC) 0 to 18 months 20±0.5LBS 18 to 36 months 25±0.5LBS 36 to 96 months 30±0.5LBS
    b. European standard: 110N ± 5 N
    c. Chinese standard: 36N ± 2.0 N for 36 months - 37 months - 96 months 136 ± 2.0 N
    d. Customer standard: refer to customer standard
    2. If there are sharp edges, sharp points and small objects after the test, it will be regarded as unqualified.


  • Previous:
  • Next:

  • Dee ozi gị ebe a na-ezite ya anyị
    industrial sewing machine