OSU de căldură Tester Viteza de eliberare
OSU Heat Release Rate Tester Stainless Steel Combustion Test Chamber Equipped
Informații despre produs de OSU hHeat Tester Rata de lansare
Rata de eliberare tester OSU căldură aprobat de FAA al Administrației Aviației Federale a Statelor Unite a fost proiectat inițial de Smith de la Ohio State University în 1972, iar mai târziu a devenit un instrument de testare de ardere FAA desemnat pentru testarea ratei de eliberare termică a materialelor aeronautice. Standardele de testare sunt FAR Partea 25 Anexa F Partea a IV-a, Airbus AITM 2.00. 06, Boeing BSS 7322.
Caracteristicile de performanță ale OSU de căldură Tester Rata de lansare
1. Stainless steel combustion test chamber with high temperature glass observation window;
2. The heat radiation source is 4 Glowbars heating rods, which can provide 35KW/M2 heat radiation flux.
3. Two independent PID temperature controllers are used for heating temperature control.
4. Equipped with fully automatic pneumatic sample propulsion device and shielding door device;
5. Equipped with upper burner and movable lower burner;
6. Rotor flowmeter can be used to adjust the gas flow rate of upper and lower burners.
7. Equipped with movable T-type calibration burner device and flow controller;
8. Mass flow controller is applied to thermopile temperature calibration automatically.
9. Water-cooled heat flow meter is equipped with cooling mode to measure the heat radiation flux of the fire surface.
10. The air temperature control device can provide constant temperature and flow air for the test chamber.
11. The orifice flowmeter is used to measure the flow pressure entering the test bin.
12. Equipped with data acquisition system and heat release standard test software.
Produs parametrii of OSU Heat Release Rate Tester
mărimea | 760mm (W) x 1850mm x (H) x 850mm (D) |
Greutate | 218KG |
cerinţe de energie electrică | 220 V, 35 amperi |
Temperatura ambientala | 10 ℃ la 35 ℃ |
auxiliar de gaz | Temperatură constantă și gaz curent constant |
a gazelor de ardere | metan |
Standard | AITM 2.0006, BSS 7322, FAR PARTEA 25 ANEXA F Partea a IV- |
Aplicații | Materiale pentru aviație |