Re: ດົນຕີຄວາມຮ້ອນປ່ອຍອັດຕາ Tester
OSU Heat Release Rate Tester Stainless Steel Combustion Test Chamber Equipped
ຂໍ້ມູນຂ່າວສານຜະລິດຕະພັນ ຂອງ OSU hHeat ປ່ອຍອັດຕາ Tester
ການທົດສອບອັດຕາການປ່ອຍຄວາມຮ້ອນ OSU ອະນຸມັດໂດຍ FAA ຂອງການບໍລິຫານການບິນລັດຖະບານກາງຂອງສະຫະລັດອາເມລິກາໄດ້ອອກແບບດັ້ງເດີມໂດຍ Smith ຂອງ University ລັດໂອໄຮໂອໃນປີ 1972, ແລະຕໍ່ມາໄດ້ກາຍເປັນເຄື່ອງມືການທົດສອບການເຜົາໃຫມ້ FAA ທີ່ກໍານົດສໍາລັບການທົດສອບອັດຕາການປ່ອຍຄວາມຮ້ອນຂອງອຸປະກອນການບິນ. ມາດຕະຖານການທົດສອບແມ່ນ FAR Part 25 ເອກະສານຊ້ອນ F ພາກທີ IV, Airbus AITM 2.00. 06, Boeing BSS 7322.
ລັກສະນະປະສິດທິພາບຂອງ OSU ຄວາມຮ້ອນປ່ອຍອັດຕາ Tester
1. Stainless steel combustion test chamber with high temperature glass observation window;
2. The heat radiation source is 4 Glowbars heating rods, which can provide 35KW/M2 heat radiation flux.
3. Two independent PID temperature controllers are used for heating temperature control.
4. Equipped with fully automatic pneumatic sample propulsion device and shielding door device;
5. Equipped with upper burner and movable lower burner;
6. Rotor flowmeter can be used to adjust the gas flow rate of upper and lower burners.
7. Equipped with movable T-type calibration burner device and flow controller;
8. Mass flow controller is applied to thermopile temperature calibration automatically.
9. Water-cooled heat flow meter is equipped with cooling mode to measure the heat radiation flux of the fire surface.
10. The air temperature control device can provide constant temperature and flow air for the test chamber.
11. The orifice flowmeter is used to measure the flow pressure entering the test bin.
12. Equipped with data acquisition system and heat release standard test software.
ຜະລິດຕະພັນ ພາລາມິເຕີ of OSU Heat Release Rate Tester
ຂະຫນາດ | 760mm (W) x 1850mm x (H) x 850mm (D) |
ນ້ໍາຫນັກ | 218KG |
ຄວາມຕ້ອງການໄຟຟ້າ | 220 V, 35 Amps |
ອຸນຫະພູມອາກາດລ້ອມຮອບ | 10 ℃ກັບ 35 ℃ |
ຊ່ວຍ Gas | ອຸນຫະພູມຄົງທີ່ແລະຄົງທີ່ Gas ປັດຈຸບັນ |
ອາຍແກັສການເຜົາໃຫມ້ | methane |
ມາດຕະຖານ | AITM 2,0006, BSS 7322, FAR PART 25 ພາກຜະຫນວກ F ພາກທີ IV |
ຄໍາຮ້ອງສະຫມັກ | ວັດສະດຸການບິນ |