China Osu Heat Khipha Ukukala Tester Abakhiqizi futhi Suppliers | Skyline

Osu Heat Khipha Ukukala Tester

Incazelo emfushane:

I Osu ukushisa Ukukhululwa izinga umhloli evunywe FAA ye-Federal Aviation Administration yase-United States ekuqaleni elaklanywa Smith we-Ohio State University ngo-1972, futhi kamuva waba FAA esiqokiwe omlilo ukuhlolwa ithuluzi ukuhlola ukushisa ukukhululwa ngesilinganiso Aeronautical izinto.


  • Min.Order Ubuningi: 1 iyunithi
  • Inani: kungaxoxwa
  • Iphakheji: Plywood Case
  • Model: SL833
  • Amazinga: AITM 2,0006, BSS 7322, FAR INGXENYE 25 ISITHASISELO F Ingxenye IV
  • umkhiqizo Imininingwane

    umkhiqizo Amathegi

    OSU Heat Release Rate Tester Stainless Steel Combustion Test Chamber Equipped

    Ulwazi lomkhiqizo  we Osu hHeat Khipha Ukukala Tester

    The OSU heat release rate tester approved by FAA of the Federal Aviation Administration of the United States was originally designed by Smith of Ohio State University in 1972, and later became a FAA designated combustion test instrument for testing the heat release rate of Aeronautical materials. The test standards are FAR Part 25 Appendix F Part IV, Airbus AITM 2.00. 06, Boeing BSS 7322.

    Ukusebenza izici Osu Heat Khipha Ukukala Tester

    1. Stainless steel combustion test chamber with high temperature glass observation window;
    2. The heat radiation source is 4 Glowbars heating rods, which can provide 35KW/M2 heat radiation flux.
    3. Two independent PID temperature controllers are used for heating temperature control.
    4. Equipped with fully automatic pneumatic sample propulsion device and shielding door device;
    5. Equipped with upper burner and movable lower burner;
    6. Rotor flowmeter can be used to adjust the gas flow rate of upper and lower burners.
    7. Equipped with movable T-type calibration burner device and flow controller;
    8. Mass flow controller is applied to thermopile temperature calibration automatically.
    9. Water-cooled heat flow meter is equipped with cooling mode to measure the heat radiation flux of the fire surface.
    10. The air temperature control device can provide constant temperature and flow air for the test chamber.
    11. The orifice flowmeter is used to measure the flow pressure entering the test bin.
    12. Equipped with data acquisition system and heat release standard test software.

    Umkhiqizo  nemingcele of OSU Heat Release Rate Tester

     Usayizi  760mm (W) x 1850mm x (H) x 850mm (D)
     isisindo  218KG
     izidingo ugesi  220 V, 35 Amps
     lokushisa Ambient  10 ℃ kuya 35 ℃
     negesi asizayo  Izinga lokushisa njalo futhi njalo negesi yamanje
     amandla omlilo igesi  methane
     Standard   AITM 2,0006, BSS 7322, FAR INGXENYE 25 ISITHASISELO F Ingxenye IV
     izicelo  Aviation Izinto

     


  • Previous:
  • Okulandelayo:

  • Bhala umyalezo wakho lapha futhi ulithumele kithi