Skum Plastics Horisontell och vertikal Brännbarhet Tester
Foam Plastics horisontell och vertikal Antändnings Tester med MCU kontroll
Lämplig för laboratoriebetingelser enligt ISO 845: 1985 mäts av densitet av mindre än 250 kg / m3 små plast prov under små flammor på den horisontella förbränningsprestanda.
Standards
ISO9772, ISO 97.738
1. MCU kontroll, läs den automatiska timing.
2. Bunsen light blue flame height: 15mm-100mm can be adjusted, with a flame height scale
3. Sample folder vertical adjustment distance: ≤ 100mm sample holder horizontal direction adjustment distance: ≤ 70mm
4. Horizontal sample holder can be placed 90 ° textile samples folder (optional)
5. Bunsen burner automatic ignition time: any set
6. Gas source: industrial methane gas, the concentration of not less than 98%, calorific value (37 +1) MJ / m³, need to bring the regulator and pressure gauge to ensure uniform airflow. Other sources of heat (37 + 1) MJ / m³ mixed gas source or calorific value of (94 +2) MJ / m³ of propane gas can also get similar results. In the event of controversy, industrial grade methane gas should be selected.
7. Overall dimensions: width 1160mm × depth 600mm × height 1310 (including feet) mm
8. Förbränningstestområdet volym:> 0,5 kubisk, lång * brett * hög om 900mm x 590mm x 1050mm, bakgrund svart, bakgrundsbelysning ≤ 20Lux.
Omgivningstemperatur | -10 ℃ ~ 30 ℃ |
Relativ luftfuktighet | ≤85% |
Strömförsörjning spänning och effekt | 220V ± 10% 50Hz mindre än 100W |
Bunsenbrännare diameter | 9,5 mm ± 0,3 mm |
Bunsenbrännare kan lutas i intervallet | 0-45 ° |
Generella dimensioner | W 1160mm × D 600mm × H1310 (inklusive fot) mm |
Tillbehör
1. Strömkabel 1 2. Tändare endast en 3. Horisontell mönster kuggstång 1 4. Vertikal provstället 1 5. Luft tillförselrör 1,5 6. Reserv skala endast en