폼 플라스틱 수평 및 수직 난연성 시험기
MCU 제어와 폼 플라스틱 수평 및 수직 난연성 시험기
수평 연소 성능에 작은 불꽃 하에서 이하 250kg / m3 작은 플라스틱 샘플보다 밀도 측정 1985 다음 ISO 845 실험실 조건 하에서 적합.
기준
ISO9772, ISO 97738
1. MCU 제어, 자동 읽기 타이밍.
2. Bunsen light blue flame height: 15mm-100mm can be adjusted, with a flame height scale
3. Sample folder vertical adjustment distance: ≤ 100mm sample holder horizontal direction adjustment distance: ≤ 70mm
4. Horizontal sample holder can be placed 90 ° textile samples folder (optional)
5. Bunsen burner automatic ignition time: any set
6. Gas source: industrial methane gas, the concentration of not less than 98%, calorific value (37 +1) MJ / m³, need to bring the regulator and pressure gauge to ensure uniform airflow. Other sources of heat (37 + 1) MJ / m³ mixed gas source or calorific value of (94 +2) MJ / m³ of propane gas can also get similar results. In the event of controversy, industrial grade methane gas should be selected.
7. Overall dimensions: width 1160mm × depth 600mm × height 1310 (including feet) mm
8. 연소 테스트 면적 량 : 배경 블랙, 900mm × 590mm × 약 1,050mm> 0.5 입방 길고 넓은 * * 높은 배경 조명 ≤ 20Lux.
주위 온도 | -10 ℃ ~ 30 ℃ |
상대 습도 | ≤85 % |
전원 공급 장치 전압 및 전력 | 220V ± 10 % 이하 50HZ 전력 100W보다 |
분젠 버너 직경 | 9.5MM ± 0.3mm의 |
분젠 버너 범위로 기울어 질 수있다 | 0-45 ° |
전체 크기 | W 1,160mm × D 600mm × H1310 (포함 피트) mm |
부속품
1. 전원 코드 1 만 2 점화기 1~3 수평 패턴 랙 1~4 세로 샘플 랙 1~5 에어 공급관 1.5 6. 예비 규모 만 1