Foam Plastics Horizontale en verticale Ontvlambaarheid Tester
Foam Plastics Horizontaal en Verticaal Ontvlambaarheid Tester met MCU controle
Geschikt voor laboratorium omstandigheden ISO 845: 1985 gemeten door de dichtheid lager dan 250 kg / m3 kleine plastic monsters onder kleine vlammen in de horizontale verbrandingsprestaties.
normen
ISO9772, ISO 97738
1. MCU control, lees de automatische timing.
2. Bunsen light blue flame height: 15mm-100mm can be adjusted, with a flame height scale
3. Sample folder vertical adjustment distance: ≤ 100mm sample holder horizontal direction adjustment distance: ≤ 70mm
4. Horizontal sample holder can be placed 90 ° textile samples folder (optional)
5. Bunsen burner automatic ignition time: any set
6. Gas source: industrial methane gas, the concentration of not less than 98%, calorific value (37 +1) MJ / m³, need to bring the regulator and pressure gauge to ensure uniform airflow. Other sources of heat (37 + 1) MJ / m³ mixed gas source or calorific value of (94 +2) MJ / m³ of propane gas can also get similar results. In the event of controversy, industrial grade methane gas should be selected.
7. Overall dimensions: width 1160mm × depth 600mm × height 1310 (including feet) mm
8. Combustion testgebied volume:> 0,5 kubieke, lang * breed * hoog ongeveer 900mm x 590mm x 1050mm, achtergrond, achtergrond verlichting ≤ 20lux.
| Omgevingstemperatuur | -10 ℃ ~ 30 ℃ |
| relatieve vochtigheid | ≤85% |
| Voedingsspanning en macht | 220V ± 10% 50Hz vermogen minder dan 100W |
| Bunsenbrander diameter | 9,5 mm ± 0,3 mm |
| Bunsenbrander kan worden gekanteld in het bereik | 0-45 ° |
| Totale afmetingen | W 1160mm x D x 600mm H1310 (inclusief voet) mm |
Accessoires
1. Voedingskabel 1 2. Ontsteker slechts 1 3. Horizontale patroon rek 1 4. Verticale monsterrek 1 5. luchttoevoerleiding 1.5 6. Reserve schaal slechts 1
