SL-FL18 Horizontal Flammability Testing Equipment
SL-FL18 ISO 3795 Automotive Interior Horizontal Flammability Testing Equipment
Produkt införandet av horisontell Brännbarhet Testing Equipment
Horisontell Antändlighet Tester, att bestämma de komparativa förbränningshastigheter och bränna motstånd av textilier, i synnerhet de för fordons användning inomhus. Horisontell brännbarhet testare är säkert och lätt att använda, utkast Består fri rostfritt stål skåp med observationsfönster, provhållaren och dörrmonterade brännare.
Automatisk gas och inställningsstyrsystemet inklusive styrmagnet gasventilen och automatisk tändning timer och kontroller.
Produktparametrar horisontell Brännbarhet Testing Equipment
Brand munstycksdiameter | 9,5 mm |
brand höjd | 38mm +/- 2 |
prov klämma | 360x100mm |
inredning Dimension | 330x50mm |
Provet nedan | 25mm Pitch mellan metalltrådar är 25mm |
markerade linjen | Utgångspunkt 38mm / Slutpunkt 292mm från Antända punkt |
Avstånd från munstycket till prov | 19mm |
Kraft | 220/110 V 50/60 Hz 2 A |
Vikt | 18 kg |
Dimension för brännbarhetskammaren | 381 mm x 203 mm x 356 mm |
Mått | 460 × 200 × 400 mm (LxBxH) |
Produkt Inslag i horisontell Brännbarhet Testing Equipment
Denna anordning är lämplig för att bestämning för antändbarhet, efter bränning, flamhärdighet och bränning hastighet bilparke organiska material.
Comply with ISO 3795, ASTM D5132, FMVSS 302 etc.
Comprised of draft free stainless steel cabinet with observation window, sample holder and door mounted burner.
Automated control of timing and gas supply.
1. Test box förbränningen är gjord av rostfritt stål med en väggtjocklek av 2 mm, vilket inte är lätt att deformeras efter förbränning.
2. There are 10 19 mm ventilation holes at the bottom of the box and 13 mm wide ventilation grooves around them.
3. Bunsen lamp burner, nozzle inner diameter 9.5 mm, flame height can be adjusted to 38 mm;
4. The box body is equipped with transparent observation window of toughened glass, which can be easily observed by testers.
5. The bottom of the box is equipped with a collection tray for collecting molten droplets.
6. The U-shaped stainless steel sample clamp can be inserted from the right side of the box body.
7. After inserting U-type stainless steel sample clamp, the instrument can automatically timing.
8. The combustion flame can be cut off automatically after 15 seconds of testing.
9. Provide needle valves and ball valves to adjust and cut off gas.
10. Optional stainless steel sample clamp with heat-resistant metal wire for flexible fabrics.
Produktdetaljer i horisontell Brännbarhet Testing Equipment
Horisontell förbrännings testaren är lämplig för förbränningseffektivitetstestet av bil invändiga material. Den uppfyller standarden GB 8410 och FMV SS302, etc.
EG direktiv 95/28 / EG avser brinnegenskaperna hos material som används i inredningen till vissa kategorier av motorfordon, och syftar till att säkerställa att de uppfyller brandsäkerhetsstandarder.
95/28 / EG brandtestet till innermaterial av motorfordon för att bestämma Karakteristiskt för Burning: Horisontell Burning Behavior, Vertikal Burning, Behavior, Burning Dropping.
testnings Standards
ISO 3795, FMVSS 302, DIN 75200, SAE J369, ASTM D5132, JIS D1201, BSAU 1690