Cina OSU Panas Release Laju tester Manufacturers na suppliers | Skyline

OSU Panas Release Laju tester

Pondok Description:

The OSU panas tester laju release disatujuan ku FAA tina Federal Aviation Administration Amérika Sarikat asalna dirancang ku Smith ti Ohio State University dina taun 1972, sarta saterusna jadi durukan test instrumen FAA ditunjuk pikeun nguji laju release panas bahan Aeronautical.


  • Min.Order kuantitas: 1 Unit
  • Harga: Negotiable
  • Paket: lapis Case
  • Model: SL833
  • Standar: AITM 2,0006, BSS 7322, jauh bagian 25 Appendix F Bagian IV
  • jéntré produk

    Tags produk

    OSU Heat Release Rate Tester Stainless Steel Combustion Test Chamber Equipped

    Inpo produk  tina OSU hHeat Release Laju tester

    The OSU heat release rate tester approved by FAA of the Federal Aviation Administration of the United States was originally designed by Smith of Ohio State University in 1972, and later became a FAA designated combustion test instrument for testing the heat release rate of Aeronautical materials. The test standards are FAR Part 25 Appendix F Part IV, Airbus AITM 2.00. 06, Boeing BSS 7322.

    ciri kinerja OSU Panas Release Laju tester

    1. Stainless steel combustion test chamber with high temperature glass observation window;
    2. The heat radiation source is 4 Glowbars heating rods, which can provide 35KW/M2 heat radiation flux.
    3. Two independent PID temperature controllers are used for heating temperature control.
    4. Equipped with fully automatic pneumatic sample propulsion device and shielding door device;
    5. Equipped with upper burner and movable lower burner;
    6. Rotor flowmeter can be used to adjust the gas flow rate of upper and lower burners.
    7. Equipped with movable T-type calibration burner device and flow controller;
    8. Mass flow controller is applied to thermopile temperature calibration automatically.
    9. Water-cooled heat flow meter is equipped with cooling mode to measure the heat radiation flux of the fire surface.
    10. The air temperature control device can provide constant temperature and flow air for the test chamber.
    11. The orifice flowmeter is used to measure the flow pressure entering the test bin.
    12. Equipped with data acquisition system and heat release standard test software.

    Produk  parameter of OSU Heat Release Rate Tester

     ukuran  760mm (W) x 1850mm x (H) x 850mm (d)
     beurat  218KG
     syarat listrik  220 V, 35 AMPS
     hawa ambient  10 ℃ nepi ka 35 ℃
     bantu Gas  Suhu konstanta sarta konstanta Gas Ayeuna
     gas durukan  métana
     standar   AITM 2,0006, BSS 7322, jauh bagian 25 Appendix F Bagian IV
     aplikasi  Bahan aviation

     


  • Saméméhna:
  • Hareup:

  • Nulis pesen anjeun didieu na kirimkeun ka kami