Small Flame Ignition Tester
DIN 53438 & ISO 11925-2 Small Flame Ignition Tester
Product Introduction of Small Flame Ignition Tester
Small Flame Igtion is built in accordance with DIN 53438 & ISO 11925-2：Testing of combustible materials; response to ignition by a small flame, with surface ignition and edge ignition.
Combustibility tester uses Kleinbrenner (Kleinbrenner) principle in Germany to measure the combustion performance of building materials under direct impact of small vertical flame. It is suitable for testing related categories B, C, D, E, Bfl, Cfl, Dfl and Efl of building materials. The device provides an overall solution to facilitate the use of operators. The tester also meets the testing requirements of DIN 4102; Part 1; Class B2.
Product Features of Small Flame Ignition Tester
The combustion chamber is made from corrosion resistant stainless steel, to maximize operating life.
It has large front and side doors for easy access. These are glazed with toughened glass for full view of the specimen during a test.
An extensively adjustable burner assembly, mounted on runners, to enable the small premixed flame to be tilted at an angle of 45degree to the specimen and offered to it in one fluid movement.
Specimen holder capable of housing the specimens up to and including 60 mm thick.
A fully adjustable specimen support frame facilitating lateral movement of the specimen holder so that the flame can be applied either at the specimen centre position, or at laterally spaced points
Product parameters of Small Flame Ignition Tester
| Anemometer | 0-10 m/s range |
| Pressure reducing valve | Between 10 kPa and 50 kPa |
| Size | 850 mm (W) X 450 mm (D) X 800 mm (H) |
| Weight | 24KG |
| Standard | DIN 53438、ISO 11925-2、EN 13501、IEC 61730-2：2016 |
| Timing device | 0.2 sec divisions |
| Application | Buliding Materials、Rail、Automotive Interior |
| Gas | Propane with a minimum purity of 95% |
