ASTM Tumble Test Steps
Wood Material ASTM Tumble Test Steps 6 Layers For Wheeled Toys
Product introduction of the ASTM Tumble Test Steps
It is used for Tipover Test for Large, Bulky Toys—Large, bulky toys shall be tested for impact by tipping over three times, one of which is in the worst attitude by pushing the sample slowly past its center of balance onto the impact medium described in 8.7.3.
Product parameters of the ASTM Tumble Test Steps
| “A” | shall be not less than 3ft (9.4mm) |
| “B” | shall be not less than 7in (180mm) |
| “C” | shall be not more than 9 in (230mm) |
Product Feature and Application of the ASTM Tumble Test Steps
| Height for step | 180mm |
| Dimension | 1840x914x1080mm |
| Steps | 6 layers |
| Material | wood |
| Standard | ASTM F963 |
Write your message here and send it to us
