Golv Radiant Panel Tester
Golv Radiant Panel Tester Stainless Steel testlåda Can Records flamma Spread Time av sig själv
Produktprofil of Golv Radiant Panel Tester
ISO 9239 Radiant Flooring Panel test är hörnstenen i golvmaterial reaktion på brandförsök i Euroclass-systemet. Testet mäter flamspridning av provet under termisk exponering, med användning av en strålningsvärme antändningskälla. Den termiska exponeringen är att en brand växer i rummet i ursprung som genom en dörröppning, strålar på golvbeläggningar i ett angränsande rum eller korridor. Anordningen kan också användas för proven på standarder ASTM E648 och DIN 4102; Del 14.
Strålnings testare av beläggningsmaterial används för att mäta den kritiska värmestrålningsflöde av marktäckmaterial. Den kritiska strålningsflöde refererar till den infallande värme per ytenhet. Ju större den infallande värme, desto högre den erforderliga uppvärmnings mängd material, desto stabilare är materialet, och den mindre risken för antändning. I denna testanordning, är en termisk strålningskälla och en T-typ brännare installerad. Ju längre provet är från strålningskällan, Flux ju lägre värmestrålning mottas på ytan. Provet antänds av en T-typ brännare. Skadan avstånd av provet efter flamman slocknar mäts, och motsvarande värmestrålningsflödet värde, dvs kritisk värmestrålningsflödet, mäts.
Prestandaegenskaper av Golv Radiant Panel Tester
1. rostfritt stål testlåda antar dörren konstruktion, vilket är bekvämt för rengöring av innerväggen av lådan.
2. The inner wall of the box is calcium silicate plate, which can prevent high temperature and corrosion.
3. Stainless steel smoke collector, as for the upper part of the combustion test box;
4.300mm X 450mm porous ceramic thermal radiation plate, placed at 30 degrees angle;
5. Provide T-type porous burner, apply open fire to the sample and adopt cylinder driving mode.
6. The optical system consists of an incandescent lamp with a light source of 2900 +100 K color temperature and a silicon light diode as the light source.
7. A shutter is installed at the front end of the silicon light-emitting diode, which can be opened and closed automatically by computer testing software for easy calibration.
8. Rotor flowmeter adjusts the flame height of T-type burner.
9. Propane mass flowmeter adjusts the gas flow rate of radiation plate and displays it digitally.
10. Self-contained blower provides air source and passes Venturi mixture test gas.
11. Mass flow controller is used to adjust the intake flow of radiation plate.
12. SB water-cooled heat flow meter, working range is 0-50 kW/m2, the accuracy of heat flow meter is less than 2%, response time is 0.2 s. It provides portable cooling water source without external water.
13. The user can move the heat flow meter to calibrate the radiation flux of the radiation plate conveniently. At the same time, the test software can draw the standard heat radiation flux curve.
14. It is equipped with pedal switch. According to the flame spread distance, users can acquire the flame spread time to reach the test distance. At the same time, the computer records the flame spread time by itself.
15. Install one chimney thermocouple and one thermocouple in the box, which can be displayed by computer software.
16. Equipped with infrared radiometer, the temperature of radiation plate can be detected and displayed by computer software.
17. Equipped with 15 inch industrial touch screen computer, users can monitor the whole combustion test process through the test software.
18. The software can display the data of heat radiation flux, smoke density curve, transmittance curve and wind speed.
Produkt parametrar för Golv Radiant Panel Tester
Mått | 1900mm (H) x 750mm (L) x 1900mm (D) |
Vikt | 235KG |
elektricitet krav | 220 V, 10 Amps |
Omgivningstemperatur | 10 ℃ to 35℃ |
hjälpgas | Air Compressor Gas |
förbrännings~~POS=TRUNC gas | propån |
Standards | ASTM E648, ASTM E970, ISO 9239-1:2010 |
Application fields | building materials, rail transit, other fields, automobile interior |