Plancher Radiant Tester panneau
Revêtement de sol Tester panneau radiant Boîte d'essai en acier inoxydable Can Enregistre le Temps de propagation de la flamme par lui-même
Profil du produit of plancher radiant Tester panneau
Le test Panel plancher radiant ISO 9239 est la pierre angulaire des matériaux de revêtement de sol réaction à des essais d'incendie dans le système Euroclasse. Le test mesure la propagation de la flamme de l'échantillon, en cas d'exposition thermique, en utilisant une source d'allumage de la chaleur rayonnante. L'exposition à la chaleur est celle d'un feu de plus en plus dans la chambre d'origine qui à travers une ouverture de porte, rayonne sur les revêtements de sol dans une pièce adjacente ou couloir. L'appareil peut également être utilisé pour les essais des normes ASTM E648 à et DIN 4102; Partie 14.
Le testeur de rayonnement du matériau de revêtement est utilisé pour mesurer le flux de rayonnement de chaleur critique de matériau de revêtement de sol. Le flux de rayonnement critique se réfère à la chaleur incidente par unité de surface. Plus la chaleur incidente est élevée, plus la quantité de chauffage nécessaire de la matière, la plus stable est la matière, et moins la possibilité d'allumage. Dans ce dispositif de test, une source de rayonnement thermique et un brûleur de type T sont installés. Plus l'échantillon provient de la source de rayonnement, plus le rayonnement de la chaleur du flux reçu sur la surface. L'échantillon est mis à feu par un brûleur de type T. La distance de dégâts de l'échantillon après les éteint la flamme est mesurée et la valeur de flux de rayonnement de chaleur correspondant, ce flux critique de rayonnement thermique, est mesurée.
Caractéristiques de performance de plancher radiant Tester panneau
1. La boîte d'essai en acier inoxydable adopte la conception de la porte d' entrée, ce qui est pratique pour le nettoyage de la paroi intérieure de la boîte.
2. The inner wall of the box is calcium silicate plate, which can prevent high temperature and corrosion.
3. Stainless steel smoke collector, as for the upper part of the combustion test box;
4.300mm X 450mm porous ceramic thermal radiation plate, placed at 30 degrees angle;
5. Provide T-type porous burner, apply open fire to the sample and adopt cylinder driving mode.
6. The optical system consists of an incandescent lamp with a light source of 2900 +100 K color temperature and a silicon light diode as the light source.
7. A shutter is installed at the front end of the silicon light-emitting diode, which can be opened and closed automatically by computer testing software for easy calibration.
8. Rotor flowmeter adjusts the flame height of T-type burner.
9. Propane mass flowmeter adjusts the gas flow rate of radiation plate and displays it digitally.
10. Self-contained blower provides air source and passes Venturi mixture test gas.
11. Mass flow controller is used to adjust the intake flow of radiation plate.
12. SB water-cooled heat flow meter, working range is 0-50 kW/m2, the accuracy of heat flow meter is less than 2%, response time is 0.2 s. It provides portable cooling water source without external water.
13. The user can move the heat flow meter to calibrate the radiation flux of the radiation plate conveniently. At the same time, the test software can draw the standard heat radiation flux curve.
14. It is equipped with pedal switch. According to the flame spread distance, users can acquire the flame spread time to reach the test distance. At the same time, the computer records the flame spread time by itself.
15. Install one chimney thermocouple and one thermocouple in the box, which can be displayed by computer software.
16. Equipped with infrared radiometer, the temperature of radiation plate can be detected and displayed by computer software.
17. Equipped with 15 inch industrial touch screen computer, users can monitor the whole combustion test process through the test software.
18. The software can display the data of heat radiation flux, smoke density curve, transmittance curve and wind speed.
Produit paramètres de plancher radiant Tester panneau
Dimensions | 1900mm (H) x 750mm (L) x 1900mm (D) |
Poids | 235KG |
besoins d'électricité | 220 V, 10 ampères |
Température ambiante | 10 ℃ to 35℃ |
gaz auxiliaire | Gaz compresseur d'air |
gaz de combustion | propane |
Normes | ASTM E648, ASTM E970, ISO 9239-1:2010 |
Application fields | building materials, rail transit, other fields, automobile interior |