Single Cable Vertical Flame Test Equipment
Single Insulated Wire and Cable Vertical Flame Test Equipment
Pedaran produk tina Wire and Cable Vertical Flame Test Equipment
IEC 60332 Single Insulated Kawat atanapi Cable nangtung Flammability tester dipaké pikeun diaméterna konduktor gede ti 8mm (cross-sectional aréa leuwih gede ti 0.5mm2) atanapi kirang ti 8mm (aréa cross-sectional kirang ti 0.5mm2) tina single kawat na flammability sambungan kabel assessment . Ieu cocog pikeun panalungtikan, produksi jeung pamariksaan kualitas departemén produk listrik jeung éléktronik sareng komponenana kayaning parabot cahaya, tegangan panerapan listrik low, panerapan rumah tangga, parabot mesin, panerapan listrik, parabot listrik, instrumen éléktronik, instrumen listrik, panyambungna listrik sarta asesoris. Dina garis kalawan IEC 60332.
Product parmeters of the Single Cable Vertical FlameTest Equipment
| Burner | Inner diameter Φ9.5mm ± 0.5mm |
| Test inclination angle | 45° style beam can move back and forth, adjust the position of the Bunsen burner according to the Specimen thickness; |
| Flame height | 20mm ± 2mm to 190mm ± 1mm adjustable |
| Flame time | 0-999.9s ± 0.1s adjustable |
| Combustion gas | 95% propane gas (usually replaced by liquefied petroleum gas) |
| Gas | high-purity propane gas or liquefied petroleum gas (user-supplied) |
| The length of the tested wire and cable | 600±25mm |
| Burning torch standard power | 1KW |
| Supply voltage | 220V/50Hz |
| Gas flow | 0-1L/min |
| Air flow | 1.5-15L/min |
| Box material | steel electrostatic spraying |
| Dimensions | length 60 cm wide 45 cm high 156 cm |
aplikasi
Tés dina kabel serat listrik jeung optik dina seuneu kaayaan-Part 1-2: Test pikeun rambatan seuneu nangtung pikeun kawat insulated tunggal atawa sambungan kabel-Prosedur keur 1 KW pre-dicampur seuneu
Spesifikasi produk tina Wire and Cable Vertical Flame Test Equipment
Luar diaméter kawat sarta sambungan kabel dites: konduktor diaméterna leuwih gede ti 0.8mm atanapi cross-sectional aréa leuwih gede ti 0.5mm2
alat nu kudu ditempatkeun dina (23 ± 10) ° lingkungan C unventilated na suhu
Standar test
IEC60332 MT818 MT386 ISO5656
