Single Cable Vertical Flame Test Equipment
Single Insulated Wire and Cable Vertical Flame Test Equipment
의 제품 설명 Wire and Cable Vertical Flame Test Equipment
IEC 60332 단일 절연 전선 또는 케이블 세로 가연성 시험기 8mm보다 도체 직경보다 (0.5mm2보다 단면적 이상) 사용 이하인 8mm 이상 (단면적 이하 0.5mm2 이상) 단일 와이어 케이블 난연성 평가되고 . 여기에는 조명 장비, 낮은 전압 전기 제품, 가전 제품, 기계, 전기 제품, 전기 공구, 전자 기기, 전기 기기, 전기 커넥터 등 전기 전자 제품 및 부품의 연구, 생산 및 품질 검사 부서에 적합 부속품. IEC 60332과 일치합니다.
Product parmeters of the Single Cable Vertical FlameTest Equipment
Burner | Inner diameter Φ9.5mm ± 0.5mm |
Test inclination angle | 45° style beam can move back and forth, adjust the position of the Bunsen burner according to the Specimen thickness; |
Flame height | 20mm ± 2mm to 190mm ± 1mm adjustable |
Flame time | 0-999.9s ± 0.1s adjustable |
Combustion gas | 95% propane gas (usually replaced by liquefied petroleum gas) |
Gas | high-purity propane gas or liquefied petroleum gas (user-supplied) |
The length of the tested wire and cable | 600±25mm |
Burning torch standard power | 1KW |
Supply voltage | 220V/50Hz |
Gas flow | 0-1L/min |
Air flow | 1.5-15L/min |
Box material | steel electrostatic spraying |
Dimensions | length 60 cm wide 45 cm high 156 cm |
신청
불 아래 전기 및 광섬유 케이블에 대한 시험 조건 파트 1-2 : 1 KW 예비 혼합 화염을위한 단일 절연 전선 또는 케이블 절차 수직 화염 전파 시험
의 제품 사양 Wire and Cable Vertical Flame Test Equipment
와이어 및 케이블의 외경 시험 : 0.5mm2보다 0.8 또는 단면적보다 큰 도체 직경보다
장치는 통풍이 나쁜 온도 (23 ± 10) ℃, 환경에 있어야
시험 기준
IEC60332 MT818 MT386 ISO5656
여기에 메시지를 작성하여 보내주십시오