OSU calor de l'provador de la velocitat d'alliberament
OSU Heat Release Rate Tester Stainless Steel Combustion Test Chamber Equipped
Informació sobre el producte de la velocitat d'alliberament de OSU hHeat Tester
El provador de la velocitat d'alliberament de calor OSU aprovat per la FAA de l'Administració Federal d'Aviació dels Estats Units va ser dissenyat originalment per Smith de la Universitat Estatal d'Ohio el 1972, i més tard es va convertir en un instrument de prova de combustió FAA designat per provar la velocitat d'alliberament de calor dels materials aeronàutics. Les normes de prova són FAR Part 25 Apèndix F de la Part IV, Airbus AITM 2,00. 06, Boeing BSS 7322.
Les característiques de rendiment de OSU Heat Release Rate Tester
1. Stainless steel combustion test chamber with high temperature glass observation window;
2. The heat radiation source is 4 Glowbars heating rods, which can provide 35KW/M2 heat radiation flux.
3. Two independent PID temperature controllers are used for heating temperature control.
4. Equipped with fully automatic pneumatic sample propulsion device and shielding door device;
5. Equipped with upper burner and movable lower burner;
6. Rotor flowmeter can be used to adjust the gas flow rate of upper and lower burners.
7. Equipped with movable T-type calibration burner device and flow controller;
8. Mass flow controller is applied to thermopile temperature calibration automatically.
9. Water-cooled heat flow meter is equipped with cooling mode to measure the heat radiation flux of the fire surface.
10. The air temperature control device can provide constant temperature and flow air for the test chamber.
11. The orifice flowmeter is used to measure the flow pressure entering the test bin.
12. Equipped with data acquisition system and heat release standard test software.
Productes paràmetres of OSU Heat Release Rate Tester
mida | 760 mm (W) x 1850mm x (H) x 850 mm (D) |
pes | 218KG |
les necessitats d'electricitat | 220 V, 35 Amps |
Temperatura ambient | 10 ℃ a 35 ℃ |
gas auxiliar | La temperatura i la constant dels gasos actual |
gas de combustió | metà |
Estàndard | AITM 2.0006, BSS 7322, FAR PART 25 APÈNDIX F Part IV |
Aplicacions | Materials d'aviació |