Whakapā Heat Transimmision Test
Contact Heat Transimmision Test Apparatus with Automatic Programming Control
Hua parameters of the Whakapā Heat Transimmision Test
paerewa | EN 702, ISO 12127-1 |
Ko te diameter o te mata whakapā | ¢ 25.2 ± 0.05 mm |
Whakamahana Range Heating | Room Temperature ki 500 Temperature |
awhe inenga Temperature | ≥ 500 C |
kaha Whakapā | 49 ± 0.5N |
tere Whakapā | 5 ± 0.02mm / s |
matawā wā Critical | 0-99.99 hēkona, tika: +0,01 hēkona |
rahi tauira | 80 mm te whānui |
Taumaha | 600 (D) X 250 (mm) X 650 (mm) |
rahi | 55KG |
Temperature ambient | Operating25 ± 5 ℃ |
Tuhinga Gas | Pōwaro me te rangi kōpeke rangi |
Product Profile of the Whakapā Heat Transimmision Test
Contact heat resistance test device, developed according to EN702 test standard, also meets the requirements of domestic AQ 6103-2007 welding protective gloves contact heat resistance test standard. The test results can show the contact temperature, the starting time and the threshold time. The principle is that under the set contact temperature, the protective fabric can contact the heated cylinder at the same time withstanding the pressure of 49N. The time when the temperature rises from the initial temperature to 10 degrees C is called the threshold time, and the time is used to evaluate the protective weaving. Thermal protection performance of the product.
Hua Feature of the Whakapā Heat Transimmision Test
- Metal whakamahana ki tiketike pāmahana rauemi ātete i whakamahia, a ko te diameter o te mata whakapā 25.2 ± 0.05 mm.
- Whakamahana whakawera whānui: pāmahana rūma ki 500 C, Ka taea e atanga tangata-mīhini hei whakaatu wā-tūturu;
- Ko te mata whakapā o calorimeter 25 ± 0.05 × D5 ± 0.02mm, me te whānuitanga o te pāmahana inenga he kore iti iho i te 500 C.
- Whakapā kaha: 49N, tere whakapā: 5mm / s, calorimeter mana servo nekeneke, ka taea e whakatika aunoa me te hinga, ka taea e mana hōtaka whakaoti aunoa i te tukanga whakamātautau katoa;
- taea te nuku i mahue te atamira whakamahana me te tika i roto i te whakarara, i te mea watea hoki uta me te taea te whakarite i te haumaru o ngā.
- LCD rōpū whakaatu, PLC tuhi aunoa i te pāmahana pāmahana tīmatanga, wa paepae, wa paepae pāmahana whakamutunga me te wā-tūturu.
He hāngai Whakapā Heat Transimmision Test taputapu ki te kakahu paruru (tae atu ki ngā paruru ringa) ranei tikanga ona rauemi Pākēha ki te tiaki ki te pāmahana whakapā tiketike. Whāiti te tono o te paerewa e ki pāmahana whakapā i 100 ° C ki te 500 ° C.
Hangaia te taputapu kei te ka hangaia rite ki EN 702 me ISO 12127-1 paerewa.