連絡先ヒートTransimmisionテスト
Contact Heat Transimmision Test Apparatus with Automatic Programming Control
製品 parameters of the 連絡先ヒートTransimmisionテスト
規格 | EN 702、ISO 12127から1 |
接触面の直径 | ¢25.2±0.05ミリメートル |
暖房暖房レンジ | 500温度は室温 |
温度測定範囲 | ≥500 C |
接触力 | 49±0.5N |
接触速度 | 5±0.02ミリメートル/秒 |
クリティカル時間タイマー | 0から99.99秒、精度:0.01秒 |
サンプルサイズ | 直径80ミリメートル |
重量 | 600(D)×250(mm)のX 650(mm)と |
サイズ | 55キロ |
周囲温度 | Operating25±5℃ |
ガス用品 | プロパンガスと空気圧縮空気 |
Product Profile of the 連絡先ヒートTransimmisionテスト
Contact heat resistance test device, developed according to EN702 test standard, also meets the requirements of domestic AQ 6103-2007 welding protective gloves contact heat resistance test standard. The test results can show the contact temperature, the starting time and the threshold time. The principle is that under the set contact temperature, the protective fabric can contact the heated cylinder at the same time withstanding the pressure of 49N. The time when the temperature rises from the initial temperature to 10 degrees C is called the threshold time, and the time is used to evaluate the protective weaving. Thermal protection performance of the product.
製品 Feature of the 連絡先ヒートTransimmisionテスト
- 耐高温性材料と金属ヒータを使用し、接触面の直径は25.2±0.05 mmでした。
- ヒータ加熱範囲:500 Cまで室温、マンマシンインターフェースリアルタイム表示することができます。
- 熱量計25±0.05×D5±0.02ミリメートル、及び温度測定の範囲の接触面は、以下C. 500以上であります
- 接触力:49N、接触速度:5ミリメートル/秒、熱量計サーボモータ制御、自動で立ち上がりおよび立ち下がりができ、プログラム制御自動的に全体のテストプロセスを完了することができます。
- ヒータープラットフォームは、ローディングのために便利であり、オペレータの安全を確保することができる平行に左右に移動することができます。
- LCDディスプレイパネル、PLCは自動的に開始温度、閾値時間、閾値時間終了温度とリアルタイムの温度を記録します。
接触熱Transimmision試験装置は、防護服に(手プロテクターを含む)またはその構成材料は、高い接触温度から保護することを意図するものでも適用可能です。 標準の適用は、100°Cから500までの接触温度に制限されている°C。
装置は、EN 702およびISO 12127から1つの標準規格に従って設計及び製造されます。