Căldură de contact Transimmision de testare
Contact Heat Transimmision Test Apparatus with Automatic Programming Control
Produs parameters of the Căldură de contact Transimmision de testare
Standarde | EN 702, ISO 12127-1 |
Diametrul suprafeței de contact | ¢ 25,2 ± 0,05 mm |
Incalzitor de încălzire Interval | Temperatura camerei până la 500 Temperatură |
Interval de măsurare a temperaturii | ≥ 500 C |
forța de contact | 49 ± 0,5N |
viteza de contact | 5 ± 0,02 mm / s |
Timer timp critic | 0-99.99 secunde, precizie: +0,01 secunde |
Marime de mostra | 80 mm diametru |
Greutate | 600 (D) x 250 (mm) x 650 (mm) |
mărimea | 55kg |
Temperatura ambientala | Operating25 ± 5 ℃ |
Surse de gaz | Propan și aer aer comprimat |
Product Profile of the Căldură de contact Transimmision de testare
Contact heat resistance test device, developed according to EN702 test standard, also meets the requirements of domestic AQ 6103-2007 welding protective gloves contact heat resistance test standard. The test results can show the contact temperature, the starting time and the threshold time. The principle is that under the set contact temperature, the protective fabric can contact the heated cylinder at the same time withstanding the pressure of 49N. The time when the temperature rises from the initial temperature to 10 degrees C is called the threshold time, and the time is used to evaluate the protective weaving. Thermal protection performance of the product.
Produs Feature of the Căldură de contact Transimmision de testare
- a fost utilizat încălzitor metalic cu un material rezistent la temperaturi ridicate, iar diametrul suprafeței de contact a fost de 25,2 ± 0,05 mm.
- încălzire Încălzitor interval: temperatura camerei până la 500 C, interfața om-mașină poate fi de afișare în timp real;
- Suprafața de contact a calorimetrului 25 ± 0,05 × D5 ± 0,02mm, iar intervalul de măsurare a temperaturii nu este mai mică de 500 C.
- Forță de contact: 49N, viteza de contact: 5mm / s, calorimetru de control servo motor, se poate ridica în mod automat și toamna, programul de control poate finaliza în mod automat întregul proces de testare;
- Platforma de încălzire se poate deplasa la stânga și la dreapta, în paralel, ceea ce este convenabil pentru încărcare și poate asigura siguranța operatorilor.
- panoul de afișaj LCD, PLC înregistrează automat temperatura de pornire a temperaturii, timp de prag, pragul de timp temperatura de terminare și în timp real.
Contactul termic Transimmision Aparatură de testare se aplică îmbrăcămintei de protecție (inclusiv de protecție de mână) sau materialele sale constitutive destinate să protejeze împotriva temperaturii ridicate de contact. Aplicarea standardului este limitată la temperaturi de contact de la 100 ° C până la 500 ° C.
Aparatul este proiectat și fabricat în conformitate cu EN 702 și standardele ISO 12127-1.