Kina Gulv Radiant Panel Tester Produsenter og leverandører | skyline

Gulv Radiant Panel Tester

Kort beskrivelse:

The thermal radiation tester of paving material is used to measure the critical heat radiation flux of ground covering material. The critical radiation flux refers to the incident heat per unit area.


  • Min.Order Antall: 1 enhet
  • Pris: Etter avtale
  • Pakke: Plywood sak
  • Modell: SL-FL086
  • Standarder: ASTM E648, ASTM E970, ISO 9239-1:2010
  • Produkt detalj

    Produkttagger

    Gulv Radiant Panel Tester rustfritt stål Test Box Can Records Flame Spread tid av seg selv

    Produktprofil  of Gulv Radiant Panel Tester

    ISO 9239 Radiant Panel Test Flooring er hjørnestenen i den gulvmaterialer ved brannpåvirkning i Euro system. Testen måler flammespredning av prøven under termisk påvirkning, ved hjelp av en varmestråling antennelseskilde. Den termiske påvirkning er det av en brann vokser i rommet av opprinnelse som gjennom en portåpning, stråler ut mot belegget i et tilstøtende rom eller korridor. Apparatet kan også brukes for videre undersøkelse av standarder ASTM E648 og DIN 4102; Part 14.

    Strålingen tester av beleggmateriale blir brukt til å måle den kritiske varmestrålingen fluks av markbeleggmateriale. Den kritiske strålingsfluksen refererer til den innfallende varme pr arealenhet. Jo større den innkommende varme, jo høyere den nødvendige varmemengde materiale, jo mer stabil materialet er, og jo mindre mulighet for antennelse. I denne forsøksinnretningen, blir en termisk strålingskilde og en T-type brenner installert. Jo lenger prøven er fra strålingskilden, fluks den nedre varmestrålingen mottatt på overflaten. Prøven blir antent ved hjelp av en T-type brenner. Skaden avstand av prøven etter at flammen slukker er målt, og den tilsvarende varmestråling fluks verdi, dvs. kritisk varmestråling fluks, blir målt.

    Ytelsesegenskaper  av  Gulv Radiant Panel Tester

    1. Den rustfrie testboksen fatter døra utforming, noe som er praktisk for å rense den indre vegg av boksen.
    2. The inner wall of the box is calcium silicate plate, which can prevent high temperature and corrosion.
    3. Stainless steel smoke collector, as for the upper part of the combustion test box;
    4.300mm X 450mm porous ceramic thermal radiation plate, placed at 30 degrees angle;
    5. Provide T-type porous burner, apply open fire to the sample and adopt cylinder driving mode.
    6. The optical system consists of an incandescent lamp with a light source of 2900 +100 K color temperature and a silicon light diode as the light source.
    7. A shutter is installed at the front end of the silicon light-emitting diode, which can be opened and closed automatically by computer testing software for easy calibration.
    8. Rotor flowmeter adjusts the flame height of T-type burner.
    9. Propane mass flowmeter adjusts the gas flow rate of radiation plate and displays it digitally.
    10. Self-contained blower provides air source and passes Venturi mixture test gas.
    11. Mass flow controller is used to adjust the intake flow of radiation plate.
    12. SB water-cooled heat flow meter, working range is 0-50 kW/m2, the accuracy of heat flow meter is less than 2%, response time is 0.2 s. It provides portable cooling water source without external water.
    13. The user can move the heat flow meter to calibrate the radiation flux of the radiation plate conveniently. At the same time, the test software can draw the standard heat radiation flux curve.
    14. It is equipped with pedal switch. According to the flame spread distance, users can acquire the flame spread time to reach the test distance. At the same time, the computer records the flame spread time by itself.
    15. Install one chimney thermocouple and one thermocouple in the box, which can be displayed by computer software.
    16. Equipped with infrared radiometer, the temperature of radiation plate can be detected and displayed by computer software.
    17. Equipped with 15 inch industrial touch screen computer, users can monitor the whole combustion test process through the test software.
    18. The software can display the data of heat radiation flux, smoke density curve, transmittance curve and wind speed.

    Produkt  parametere av Gulv Radiant Panel Tester

     dimensjoner  1900mm (H) x 750mm (L) x 1900mm (D)
     Vekt  235KG
     elektrisitetsbehov  220 V, 10 ampere
     omgivelsestemperatur  10 ℃ to 35℃
     hjelpe~~POS=TRUNC Gas  Air Compressor Gass
     forbrenningsgassen  propan
     Standarder   ASTM E648, ASTM E970, ISO 9239-1:2010
     Application fields  building materials, rail transit, other fields, automobile interior 

  • Forrige:
  • Neste:

  • Skriv din melding her og send det til oss