垂直燃焼試験機
Vertical Flame Tester The Insulating Glove Fire Resistance Test
Product introduction of the Vertical Flame Tester
ライブ作業手袋に耐火性試験を絶縁するのに適した絶縁手袋火災耐性試験装置が開発されているGB / T 17622から2008とEN 60903に記載の方法。
Performance characteristics of the Vertical Flame Tester
1. Standard stainless steel box with transparent observation window can detect flame spread rate in time.
2. One stopwatch timer and one ignition device each.
3. Needle valve regulates the height of flame.
4. The burner is fixed on the sliding track for easy operation. The needle valve can adjust the flame height.
5. Equipped with ASTM D5025 standard Bunsen lamp with inner diameter of 9.5 mm (+0.3 mm), the flame temperature and height can be adjusted.
6. Equipped with GB/T 17622-2008 6.6.2 standard stainless steel sample stand two;
7. Equipped with flame height gauge.
製品 parameters of the Vertical Flame Tester
応用 | 安全保護 |
規格 | AQ 6103、EN 60903:2003 |
寸法 | 500ミリメートル(W)×550ミリメートル(H)×300ミリメートル(D) |
重量 | 19 KG |
電気要件 | 220V、50HZ、3A |
環境要件 | 温度(20 + 2)度C、湿度(65 + 5)% |
ガスの要件 | プロパン |