Single Cable Vertical Flame Test Equipment
Single Insulated Wire and Cable Vertical Flame Test Equipment
製品の説明 Wire and Cable Vertical Flame Test Equipment
IEC 60332シングル絶縁ワイヤまたはケーブル垂直燃焼性試験機は、単一のワイヤ、ケーブル燃焼性評価の導体径8mmのより大きい(0.5平方ミリメートルより断面積の大きい)または8ミリメートル未満(断面積未満0.5平方ミリメートル以上)のために使用されます。 このような照明機器、低電圧電気機器、家電製品、工作機械、電気機器、電動工具、電子機器、電気機器、電気コネクタなどの電気・電子製品や部品の研究、生産、品質検査部門に適しています付属品。 IEC 60332に沿って。
Product parmeters of the Single Cable Vertical FlameTest Equipment
Burner | Inner diameter Φ9.5mm ± 0.5mm |
Test inclination angle | 45° style beam can move back and forth, adjust the position of the Bunsen burner according to the Specimen thickness; |
Flame height | 20mm ± 2mm to 190mm ± 1mm adjustable |
Flame time | 0-999.9s ± 0.1s adjustable |
Combustion gas | 95% propane gas (usually replaced by liquefied petroleum gas) |
Gas | high-purity propane gas or liquefied petroleum gas (user-supplied) |
The length of the tested wire and cable | 600±25mm |
Burning torch standard power | 1KW |
Supply voltage | 220V/50Hz |
Gas flow | 0-1L/min |
Air flow | 1.5-15L/min |
Box material | steel electrostatic spraying |
Dimensions | length 60 cm wide 45 cm high 156 cm |
応用
火災下で電気・光ファイバケーブルの試験条件パート1-2:1 KW予混合火炎のための単一の絶縁電線又はケーブル手順垂直火炎伝播のためのテスト
製品仕様 Wire and Cable Vertical Flame Test Equipment
試験ワイヤーおよびケーブルの外径:0.5平方ミリメートルより0.8ミリメートル又は断面積よりも大きい導体径の大きいです
デバイスは、換気されていないと、温度(23±10)℃の環境下に置かれるべきです
テスト規格
IEC60332 MT818 MT386 ISO5656
ここにメッセージを書いて、私たちにそれを送ります